KVM XYKJOBC REVELOPMENT, KVM Extender 4K 120m, 20 x 18 x 8 cm, exhibition

This extender has many advantages: used in pairs, does not require configuration. Instead of the HDMI cable, you can use CAT-5E / 6 cable to achieve a long-distance transmission. CAT-5E / 6 meets IEEE 568B. The resolution can be 4K * 2K @ 30Hz (120 m copper network cable category 6).

Compact design, signal transmission speed is up to 3.4 Gbps. Compatible with HDCP. It supports uncompressed sound such as LPCM. It supports compressed sound such as DTS, Dolby (including DTS-HD and Full HD Dolby). At the end of the transmission, video HDMI outputs, an independent audio output and an infrared output are available. The receiver has an independent audio output and infrared input.

Use and convenience: After completing the HDMI cable, its length is constant and can not be changed. Because the connection between HDMI port and the cable can only be made by professional employees in the factory, the user can not shorten or extend the HDMI cable. Cat-5E / 6 cable is different. This type of cable is very popular, users can handle it yourself and wire. The operation is simple and convenient.

The HDMI port is relatively large and the long HDMI cable must be covered during use (wiring), in addition, the HDMI cable is difficult to bend, while CAT-5E / 6 does not have these problems.

When using Extended, the signal transmission distance can be up to 120 meters on the CAT-5E / 6 cable, while in the case of ordinary HDMI cables, if the distance exceeds 10 meters, adjust it.

Note: The device can support 4K 30Hz resolution, but the standard output is 1920 * 1080p. If you need 4K 30Hz resolution, connect the transmitter with a 4K TV to make the receiver output also 4K 30Hz.