WANAS 350H / 2 350V / 2

High quality replacements

M5 / G4 class filters set (EPM10 / CoAnse)

A set of filters for the Wanas 350H / 2 350V / 2 recuperator consisting of one M5 class filter (ISO EPM10) and two, disposable G4 class filters (ISO Coarse) on metal frames.

• 2x G4 Filter (EU4) - 480 x 190 x 5 mm
• 1x M5 (EU5) Filter - 480 x 190 x 40 mm

Application: blow / exhaust

Product code WANAS: RE-Filter 35-40 M5, RE-Filter 35-40 G4 UC

Producer: Bisanti

Do you have doubts about whether filters will match your recuperator?

A set of three filters for the recuperator WANAS 350H / 2 350V / 2 consisting of one filter with an elongated M5 class durability (ISO EPM10 60%) and Two G4 class filters (ISO Coarse ≥ 70%). High-quality replacements not give way to the original filters.

The M5 filter has an ISO EPM10 ≥ 60% class, i.e. it stops at least 60% of pollutants and PM10 dust (with a diameter of 10 micrometers).

Filters match all Wanas 350H / 2 350V / 2 variants.

Important! Filters do not match the older 350 H / V series recuperators! Check the model of your recuperator!

The M5 class filter is made of a high-quality pleated, synthetic filter medium (Z-line pleats) deposited in a rigid cardboard frame. It is characterized by a high filtration surface, increased dust capacity and extended durability to maintain high filtering efficiency (with cyclic vacuum). By replacing a metal frame with a special, moisture-resistant cardboard frame, the filter weight was reduced, sharp edges were eliminated and the safety of use was improved.

G4 class filters are made of high-quality filter mats with a high dust absorption stretched on a metal frame that stops the largest particles of contamination and provides basic protection. MATA is made of high-quality polyester fibers combined with you mechanical and thermally which allows you to obtain optimal filtration parameters.

Keep in mind! Filters manufactured by Wanas and dedicated to Wanas 350H / 2 350V / 2 are produced only in EPM1 classes (antiSmog filters), EPM10 (M5) and CoAse (G4).

No additional elements are required to assemble filters.

A simple exchange procedure ensures comfort.

Filters meet the strict requirements of EN779.