Wireless extension kit for BitiWend 6 32V DC 3V WLAN

You are looking for Innovative solution For your ringing system that works even in the event of a damaged power supply? Viewing Wireless BitiWend transmitter, ideal for electronic, electromagnetic and mechanical ringtones. Our product is a great option when the bell power fails. Remember that the connection was 6-32 V DC, and in the case of higher voltage, use the transformer. The installation is extremely simple because the tone (+/-) tones do not have to be distinguished, which significantly facilitates the assembly process.

Connecting the transmitter with the receiver also runs without any problems. Follow the steps below to correctly connect the device:

• Briefly press up or down to select your favorite ringing tone.
• Then keep the down button for about 5 seconds to enter the pairing mode (LED flashes quickly).
• Activate the Bell button (or transmitter) to connect the receiver with the transmitter.

If the ringing ring continuously, reset the pairing code, holding down the down button for 5 seconds, which will restore the factory settings. After proper restarting when the receiver calls "Ding Dong" and LED will flash, you can perform a pairing process.

Thanks WLAN technology, Our 433 MHz frequency receiver has a range of up to 200 m in an open area and can be connected to the phone to receive remote notifications (Note: only 2.4 GHz WiFi). With Bitiwend You have the option of choosing your favorite melody from 32 different polyphonic ringing sounds, and the volume can be set on five levels (from 0 to 110 dB), which makes it a perfect solution for each home.