Plastic welding machine

▶ ️ very strong - 100W

▶ ️ 230V power supply voltage

▶ ️ staples included - 200S

Included:

• Welder 100W
• 4 types of staples
• Practical pencil case

The welding machine uses resistance cavities (staples) to thermally combine plastics. It is suitable for repairing and strengthening damaged plastics of various types.

He is listed both in repairing everyday equipment and for example cars such as bumpers or dashboards, garden toolbox elements (eg Koszarek).

Technical data:

• Power: 230
• Maximum power: 100w
• The length of the power cable: 150cm
• Staple diameter 0,8mm

The set includes staples that enable work with various types of damage - depending on the type of welding, the relevant shape of the patch must be selected. There are staples for work:

• internal angular - adapted to connect plastics at an angle from the inside
• external angular - adapted to combine plastics at an angle from the outside. Before use, it can be gently profiled to match the surface
• Simple - thin tip to the least demanding work. Gently wavy
• Complicated - firmly undulating grot for the most demanding connections. The wavy shape ensures the most powerful combination force thanks to the largest plastic contact surface

50Sztuk of each type

Principle of operation:

Mount the selected tape on the device - after pressing the trigger, the tab will start to heat. After reaching the appropriate temperature, the tip should be made into a damaged plastic to reinforce or connect items. For some connections you have to use a few tips for the best efficiency. After entering and cooling the tip, it bends manually, without using tools. Sam will give in the right place. If it does not make it according to the plan, you can cut the tips with attached censions.