Seachem Acid Buffer 600g

Seachem Acid Buffer 600g

ACID BUFFER is a buffer merely free phosphate, designed to reduce water.

It can be used together with Alkaline Buffer.oba Preparations are intended for plant aquariums or tanks with very hard water, in which phosphate buffers can accelerate the growth of undesirable algae or induce water turbidity. "ACID BUFFER" reduces the reaction, and used with "Alkaline Buffer" retains the buffer capacity in the range of 5.0 - 8.0. Lowering the pH value, "Acid Buffer" causes the distribution of salts that cause carbonate hardness and secretion absorbed for carbon dioxide plants. It can also be used to reduce salt water.
 
The most important feature, distinguishing "Acid Buffer" from other similar products, is the lack of phosphates. Therefore, it is recommended for use in plant aquariums, where excess phosphates could accelerate the growth of undesirable algae.

How to use:

In order to reduce the odor, use a daily tea tea (2g) for every 80l water in the tank until the desired reading (this amount "acid buffer" lowers the alkalin by about 0.2meq / L, or 0.6dkh). If the water is hard or has a high basicity, you can use a larger amount of the preparation.
 
In order to gradually correct the odor or if the water is soft or insufficiently cloub, the "acid buffer" and "alkaline bufer" is recommended. In this case, it is advisable to use the below reference table below. The values contained in it concern water purified in the RO or RO / DI filter. In the case of water supply water, there may be a need to correct the ratio of both buffers.