AquaForest Balling Component +1, +2, +3 3x5000ml + Free ICP 1 AF

AquaForest Balling Component +1, +2, +3 3x5000ml

Chemical composition formula Component 1 + 2 + 3 + It is based on the H.Balling method, however, has been modified and enriched with the micronutrients necessary for the proper functioning of the marine aquarium. In this way, we obtained 3 fluids that regularly dosed in an equal amount will satisfy the demand of coral not only in magnesium and calcium, but in all elements whose doses in home conditions are difficult to determine as well as require caution and the systematicity of their dosing. Maintaining a suitable level of magnesium and calcium allows you to maintain the right amount of microelements in the reef aquarium (CA 380-460 ppm, MG 1180-1460 ppm).

Dosage:

We recommend dispense of all liquids at equal doses that should be determined and corrected on the basis of corals consumption. We recommend testing basic water parameters: calcium, magnesium and carbonate hardness (KH). If the consumption of one element is greater, we recommend the dissolution of an additional solution (Calcium, Magnesium or KH Buffer) and the dosing of this solution separately until the parameters are aligned.

With medium-sealed coral hard tank, the dose is OK. 25 ml per day for 100 liters of water.

Component 1+ contains:
CA, SR, BA, CO, MN, CU, FE, ZN, NI, CR. (25ml raises CA by 4.5 ppm / 100l)

Component 2+ contains:
NaHCO3, F, I (25ml picks KH at 0.65 DKH -LK 0.23 MEQ / 100L)

Component 3+ contains:
Mg, mineral salts and K, B (25ml raises Mg by 0.38 ppm / 100l)

Component 3 contains Reef Mineral Salt, the product necessary for the correct stabilization of parameters in the aquarium.