Laboratory centrator MXMoonant, 4000 rpm, 6x15 ml, 60 min, Used

After selecting the centrifuge mode, it does not turn on!

【Function and Size】 The electric centrifuger can separate liquids from solid particles with different densities or liquid mixtures. The machine contains 6 sleeves on tubes that can accommodate centrifuge tubes with a capacity of 5 to 15 ml. Tubes with a diameter of ≤ 16 mm and length ≤ 106 mm can be placed in the sleeves.

【Low noise and safe operation】 The maximum noise level of this centrifuge is about 50 decibels, which is much quieter than in the case of ordinary products, which ensures better experience. NOTE: Please put the centrifuge tube in the machine symmetrically. Asymmetric machine operation can cause noise, vibrations and other damage. If there is only one sample, please add a tube with a solution with a similar density and the same volume in a symmetrical position.

【Adjustable speed and time】 Two rotary knobs control speed and working time: The speed range is from 0 to 4000 rpm, and time from 0 to 60 minutes. A transparent cover allows for direct observing the work of the sample, which is more intuitive and convenient. Maximum relative centrifugal force: 1685xg.

【Application areas】 Application areas include: medical care (such as hospitals, disease prevention and control centers, blood donation centers, animal husbandry and water products, farms), research (such as universities, research institutes, Development Centers and Laboratories), Production (such as Bio-Braciendlires, Biopharmaceuticals, Genetic Engineering, Biochemistry, Plant extraction, Bloody products, Food processing, Petrochemical industry, Mail separation), etc.

Safety instructions for electrical centrifuges

1. Stricially prohibits start-up without a load without rotor;
2. Before starting, check the rotor for corrosion damage;
3. During the rotor operation, do not open the centrifuge cover and do not touch the rotating rotor;
4. The impeller operation for unbalanced load is forbidden.

Daily maintenance

1. Do not put anything on the centrifuge cover.
2. After each use, necessarily clear and wipe the interior and rotor, and then cover the centrifuge cover.
3. Periodically open the centrifuge cover to dry the interior.
4. A high-resistant carbon brush engine should be exchanged for a time of 5,000 hours of use to avoid the consumption of the commutator.
5. After long-term use, natural consumption is normal.