Manufacturer's code:
10090501Compact milling milling machine Hillvert It allows you to cut the groom from the ground along with the roots, without destroying the environment. This is a turning machine with a strong gasoline engine that is very helpful for both professional gardens and hobbyists. A handy milling machine for the trunks is equipped with a strong 4-stroke gasoline engine
15 kmwhich drives two driving strips for the cutting blade for speed
3600 rpm. A powerful drive and 8 teeth with sintered carbide tips allows you to quickly remove stimmers or roots. Only chips will be on the blink of an eye. The device is digging into the ground up to 203 mm and continuously cuts the remains of trees up to 230 mm above the ground. Cutting shield has
Diameter of 240 mm and width 12 mm. Such values allow you to effectively get rid of trunks of trees, without causing greater damage around the shield. The trunks for the trunks are characterized by a compact and slender construction, so that you can easily use it in tight spaces. Ergonomic handle and large wheels greatly facilitate service. Fuel tank
6.5 L and oil tank 1.1 L They feed the engine.
Product features: - - 4-stroke gasoline motor 15 km with two drive stripes for efficient operation at 3600 rpm,
- - the compact design makes it easier to use in tight spaces,
- - large wheels, ergonomic handle and gasoline engine allow for free operation,
- - 8 sintered carbide teeth and a depth of milling 203 mm deep into the ground and 230 mm above the ground,
- - a large gasoline tank with a capacity of 6.5 L and the 1.1 L oil tank allow for uninterrupted work.
Technical parameters: - - catalog number - 10090501
- - article - New
- - Model - Ht-Forbes-15
- - Material - Rubber, Aluminum, Plastic, Steel
- - wheel size [mm] - 145 / 70-6
- - Fuel consumption [g/kWh] - 374
- - starter - Szarpak
- - fuel type - Unleaded petrol
- - Rated rotational speed [obr./min] - 3600
- - engine power [KM] - 15
- - Speed of the blade [obr./min] - 3600
- - engine type - One-cylinder, four-stroke (OHV)
- - start - With link / electric
- - Drive strap type - Direct drive of the V-belt
- - cutting teeth - 8 PC
- - acoustic power level - 103.8 DB
- - Cutting wheel diameter - 240 mm
- - acoustic pressure level - 90.8 DB
- - Depth of cut underground - 203 mm
- - Depth of cut over the ground - 230 mm
- - engine capacity - 420 cm³
- - fuel consumption - 374 L / H
- - oil tank capacity - 1.1 L
- - Cutting wheel thickness - 12 mm
- - Fuel tank capacity - 6.5 l
- - Dimensions (DXSXW) - 180 x 76 x 115 cm
- - weight - 106 kg
- - Dimensions of shipment (DXSXW) - 106 x 106 x 66 cm
- - shipping weight - 124 kg
Included:
