Jebao SLW-3 - flat circulator with 2500 l / h controller

This is the newest and most perfect model of the JEKOD / Jebao circulator. The pump was created on the basis of long-term experiences and has been significantly improved compared to the predecessors of the OW / RW series. The SLW construction assumes a continuous work in waving, where the engine structure and materials provide quiet and trouble-free operation. the device. The pump is mounted directly on the surface of the glass, using a strong magnet.

What distinguishes SLW against other circulators?

The SLW series has a whole electronics placed in the controller, guaranteeing trouble-free and no work. This solution is only found in the OW series, SOW, SDW and HSBAO EW series Over the years, this solution has been checked by thousands of users, not only in Poland and today enjoys the recognition of aquarists.

What is the difference between the SLW series from SOW?

Rożnica applies to a magnet and the method of assembly of the pump in the aquarium. SLW is mounted directly on the glass panes, thus saving space in the aquarium. The pump head itself has a flat structure, including the impeller and its shoulders, coil and housing. In addition, the pump generates 20% more efficiency in L / H with the same power consumption as its previous SOW equivalent.

Device characteristics:

- Engine:

Jecod / Jebao has recently designed this element of the circulator. The new engine design assumes a longevity, failure-free and quiet pump operation in extreme conditions and at the most loading pump work mode - waving. Changes in construction and changes in the chemical composition of materials used for the production of the engine, rotor and axis are the best solution and foster the continuous operation of the circulator in the waving mode of each type and performance.

- Magnet and assembly method:

The SLW series has a unique assembly method and the unique construction of the pump head. The structure of the cylkurator pump head has been flattened, making it almost invisible to tanks. Subtle pump installation assumes a reduction in the content of devices in the aquarium. Magnet on both sides has a special vibration damping coating and provides a strong and permanent installation of the pump. In addition, the vibration damping coating from the internal side in the aquarium, allows you to control the flow direction of the water stream.

- Performance:

The new engine type has better performance at the same power consumption.

- Controller:

The extensive controller allows full control of the pump.

What are the modes of operation?

W1: Waving mode, the circulator works in a dashed way which results in the emergence of beautiful waves on the water surface and rocking the interior of the aquarium.

W2: Waving mode, the pump smoothly changes its efficiency from 30% to 100% on the sinusoid pattern. Naturally-looking waves produce.

Else: Random mode, the pump controller sends its various, random commands to change the way.

Hours: Streaming mode, including the pump mode, a stream stream, water current.

C.: Alternate mode, pumps act on a change.

What functions do you have?

- Sunset sensor: It reduces the pump performance for a period of night, reflecting natural tidal waves.

- Feeding mode: It completely disables the pump operation for feeding the fish or corals. The pump is automatically activated after 10 minutes, starting the programmed mode previously programmed.

- Synchronization of pumps: The pump communicates wirelessly with the remaining SLW, SDW, SOW and OW series pumps from the tank.

Technical data:

- Power: 10W

- Maximum performance: 2500l / h

- Sizes: diameter 4 cm x height 4.5 cm

- window thickness: up to 10mm