Aerograph compressor for aerograph + Aerograph of the paint tubes. Kit

Model compressor for AS18-2KP Aerograph

The set includes:

• AS18-2KP compressor
• Aerograph BD-130 nozzle 0.3
• Air hose 1.8m 1/8 ',
• Two aerographs holder Shall-h4
• A set of brushes and needles for cleaning
• 5 color paintings for airbrush

Piston compressor of oil-free For each type of airbrones with the possibility of continuous operation, a thermal switch. Used in cosmetic salons, the tattoo usually in modeling and on minor painting works.

Continuous work The compressor works with 2,0mm nozzles with 2,0mm. Thanks to the high efficiency and begged cylinder design (cooling), you can paint all the time without interruptions.

Control and security A set of air preparation integrated with a compressor gives you the ability to fully control pressure and dry air on the output.

Auto Start / Stop- A very useful feature that does not only save electricity and extend the compressor life, but above all increases the comfort of work.

Noise, thermobe In compared to other compressors with similar AS18-2 parameters, there is a more quiet degicing. In addition, this compressor is equipped with a thermal switch that prevents the piston.

Cooling, switch- The entire housing is designed to remove the heat outside the compressor. A well-shaped switch is on when the compressor is turned on.

Rubber legs- They play a fundamental role in this compressor. Their shape and implementation material affects the suppression of vibrations caused by the piston. Also increase the adhesion of the compressor to the substrate.

Uchwyt- It gives you the ability to transfer the compressor even during short breaks at work, when the cylinder takes on high temperatures

Technical data of the compressor:

• Designed for airbrones with nozzles: from 0.2 to 1.0 mm
• Power 1/6 HP, ie 125 W
• Auto Start / Stop: 3 bars / 4 bars
• Performance: from 20 to 23 l / min
• Connection thread: 1/8 "
• Volume: 47db

Original Fengda Aerographs In contrast to the counterfeits you will learn about engraved inscriptions Fengda (R) BD - (...)

Airbrush BD-130 with nozzle 0.3 mm Fengda companies are characterized by:

• High precision painting
• Adjusting the amount of paint and air (one finger)
• Very precisely made spire and nozzle

Nozzle 0.3 mm It is the most universal and suitable for both shading, painting as well as drawing thin bones.

Technical data:

• Airbrush: Fengda BD-130
• Nozzle: 0.3 mm
• Reduction: 1/8 "on a 4mm push pin
• Airbrush control type: Double Action
• Tank: 7 cm3

Stand for two Aerographs BD-H4

A professionally made aerographic stand. Designed for fastening on the reducer as in the pictures. Fits many compressors in our offer, eg AS-186, AS-189, AS-196, AS-19-2, AS-18-2, AS-48A.