Temperature regulator Thermostat Inkbird ITC-308

Inkbird ITC-308 is a ready-to-use device that will check the temperature itself and reacts if necessary.

All you need to do is set the desired temperature and deviation from this temperature to plus and minus degrees Celsius. Then we have two electrical outlets:

1. Cooling - to this socket, connect the cooling device, e.g. a pump connected to the spiral cooler immersed in the liquid.
2. Heating - We connect the heater to this slot

The device will control the temperature on a regular basis and remains heating or cooling if necessary by transferring the voltage to the appropriate socket.

Features:

• Two EU sockets: for cooling device (cooling) and heating (heating),
• alarm in the event of a sensor failure and exceeding the set temperature,
• TEMPERATORY REGULATION: -50 to + 99 ° C (possibility of setting the temperature with an accuracy of 0.1 ° C),
• Accuracy: 1 ° C (-50 to + 70 ° C).
• Range of 15 ° C temperature deviation setting. (The device is set to 2 ° C).
• length of the power cable: 1.5 m,
• Cable length with a probe: 2 m,
• The length of the power cable (output): 0.2m,
• Power supply: 10 A (max.) 240 V.
• Input voltage 100 ~ 240 VAC, 50 Hz / 60 Hz.
• Output voltage Max. 10 A, 100 V ~ 240 V AC