Aquarium computer ITI ATO2 AT

Aquarium computer ITI + ATO2 AT SERIES

"ITI" Aqua-Trend is a modern, multifunctional aquarium computer designed for everyday monitoring and control of parameters in freshwater and sea aquariums. "ITI" Focuses the most desirable by the aquarists of functionalities that largely facilitate the maintenance-free cultivation of plants and aquatic animals at a high level.

Functional description:

- menu in Polish or English,

- Control panel equipped with a clear LCD display and a handling keyboard,

- 24-hour real time clock: the device operates based on the actual, current time programmed by the user,

- Dispenser: The device allows you to control the three dispensing pumps in a user-programmed manner (to fulfill the dosing function, the AT-2 dosing pump module does not constitute basic equipment),

- Temperature measurement: The device displays the current temperature based on the reading from the digital temperature sensor (the function requires the connection of the temperature sensor "Temp AT Series" which provides basic equipment),

- Temperature alarm: The device signals an acoustic alarm to exceed the fixed temperature range (the function requires a temperature sensor connection "Temp AT Series" which provides basic equipment),

- Temperature control: The device allows you to control the temperature of water in the range of cooling (using a fan or refrigerator), or in the heating range (with a heater), (the function requires a temperature sensor connecting "Temp AT Series" which provides basic equipment, and in the case of 230VAC power supply devices to connect the power strip "Power Box Atseries" not constituting basic equipment, the 12VDC powered fans can be connected directly to the controller),

- pH measurement: the device displays the current water pH value based on a pH reading (the function requires a pH connection that does not constitute basic equipment),

- pH alarm: the device indicates an acoustic alarm to exceed the fixed range of pH (the function requires a pH connection that does not constitute basic equipment),

- pH reading: the device allows you to control the water pH of the water, eg by controlling the operation of the carbon dioxide electrical dioxide, connected directly to the controller (the function requires the connection of the pH probe, and the solenoid valve which do not constitute basic equipment),

- automatic relay: a function that allows you to control and replenish evaporated from the water tank (function requires the connection of a set of automatic relay "ATO1 AT Series" For Sumps systems or "ATO2 AT Series" For tanks without SUMPA, ATO sets do not constitute basic equipment).

The packaging contains:

- "ITI" device

- User manual

- AC adapter

- Temperature sensor

Technical data:

- 12VDC 2A power supply voltage

- Maximum load of ATO PUMP connector: 500mA 12VDC

- Maximum load of SOLENOID VALVE connectors: 500mA 12VDC

- Maximum load on the Temp Control: 500mA 12VDC connector

- mass: 320g

- Dimensions: 155x170x70mm

- pH measurement range: 4-9 ° pH

- PH measurement display resolution: 0.01 ° PH

- PH measurement accuracy: 0.05 ° PH

- Temperature measurement range: 1-50 ° C

- temperature measurement resolution: 0.1 ° C

- Accuracy of temperature measurement: 0.5 ° C

- Degree of protection: IP30

ATO2 Atseries This is a set of automatic elements for cooperation with aquarium dispenser Doser at1 Plus (all versions), and aquarium computer ITI.

The kit allows you to control the water level in the tank and constantly completing its loss due to evaporation. The kit contains two independent float sensors, equipped with adjustable handles to specify the desired water level. One of the sensors is used to switch on the complementary pump, while the second sensor plays a supervisory function and prevents the operation of the complementary pump from the failure of the actuating sensor.

The set is recommended for systems without the "SUMPA" technical tank.

The kit includes:

• Level Level Sensor Running
• Emergency liquid level sensor
• Adjustable X2 level sensor holder
• water pump
• Silicone hose (1.5MB)
• Silicone hose holder

Technical data:

• Level length cable length: 200cm
• Sensor handles adjustment range: (0-13cm counting from the edge of the window to the bottom float)
• Pump: 12V DC with performance max 280l / h, Lifting max 2m, Cable length 200cm, dimensions 40x40x30mm