Blue Life Phos FX 250ml

Instructions and guidelines
Phos FX is a unique macroporous resin to remove phosphates to use both in a freshwater environment and salty.
His high efficiency, long-term balls and easy regeneration make it the most profitable remedy of phosphates on the market. Phos FX has a unparalleled ability to fast and safe adsorption of phosphates.
Do not let your reservoir fall victim to the Oklite of algae and recession of corals.
Protect your aquarium with phos fx!
A set of 250 ml will remove 5 ppm phosphates from 950 liters, 10 ppm of 475 liters, and a set of 500 ml will remove 5 ppm phosphates from 1900 liters, 10 ppm of 950 liters.

Tips:
Phos FX should be rinsed under purified water (RO) for a few seconds before use. It can be used in a canocular filter, a media reactor, a filter box or any high flow area in a well. Use the supplied media and zipper bags if they are not used in the reactor.
Use Phos FX in your system until you reach the desired phosphate level, and then remove the bag, rinse and close up in a hermetic container to avoid drying.
We do not recommend lowering phosphates by more than 0.5 ppm within 24 hours.
In the case of reef tanks, we suggest a level of PO4 between 0.05 ppm and 0.08 ppm, but all systems are different and use this only as a guide.
When the product is exhausted, you can regenerate it.
Do not let the resin to dry!