AQUAEL PFN-7500 Fountain with nozzles - 150W 7000L / H

Fountain pump line dedicated to AQUAEL joint filter drive in medium-sized water mesh. Double mechanical prefilter protects them against clogging, so that the period between maintenance works will significantly extend. They can also work outside the water pond.

High efficiency Aquajet PFN garden pumps are designed for pumping water in garden ponds, fountains, cascades, water mesh and home pools. They can also be used for other purposes, e.g. in gardening, in house and agricultural holdings, in fish farm and other animals, on construction sites, etc. Pumps can also work in salt water.

Action

Aquajet PFN pumps are driven by a waterproof synchronous engine that has small maintenance requirements. The ceramic rotor axis is practically not wearing and ensures the longevity of the pump. Thanks to the ceramic rotor axis in AQUAJET PFN pumps, they are characterized by exceptionally quiet work. A large plastic prefilter protects the pump rotor against pollution so that it does not require frequent cleaning. Thanks to the simple construction, their service is easy.
 

The pump should be completely immersed in a water reservoir. If the rotor stops, the clogging of the inlet or outlet as a result of contamination or dry work, the thermal switch installed in the pump will disconnect it from the main network until it cools down. The inclusion is automatically.

Pumps with relatively small dimensions provide high performance and lifting height. This is the result of the use of modern, energy-saving engines and high-quality gaskets under the rotor chamber, which reduce performance losses to a minimum.
 

Advantages:

• Low energy consumption and smooth performance setting.
• Despite the small size of the pump, the pump is very high and a quiet work.
• The pump has a telescopic fountain nozzle, it is also possible to use removable fountain nozzles.
• The pump has a corundular ceramic spindle that is practically not subject to wear and ensures the longevity of the pump.
• The thermal switch used in the pump will disconnect it if possible overheating, and then re-activates automatically.