Laboratory incubator. A warmer with a forced air circulation of 70c 43 L

Manufacturer's code: 10030738
Laboratory incubator Steinberg Systems Allows you to ensure the right temperature for the development of microorganisms, cell cultures or cuttings. It will work in every laboratory in the pharmacy, medicine industry, food analysis or other studies. The greenhouse is ideal for the conditions using PID control which can be set on a touch control panel and check on LCD display. It offers functions such as time and temperature setting, overheating protection, timer and automatic shutdown. The temperature controller precisely maintains the set temperature in the range from 5 to 70Deg C in the set time 0-9999 min. The lowest temperature never falls below the room temperature. This is constantly checked by sensors and automatically corrected in the case of deviations. As a result, it maintains the temperature with Accuracy to ± 1.5Deg C. The RS-485 interface allows you to connect to your computer. The temperature can be independently limited on the digital display. In addition, the device has a function Sterilization using UV light. The door to the spacious interior is a hermetically sealed with a silicone rubber gasket, which ensures a minimum loss of temperature during incubation of cultures or bacteria. The two-door system offers heat-resistant doors made of tempered glass, which, if necessary, give an insight into the progression of breeding. External doors serve as a cover closed on magnets. The temperature is distributed evenly in the interior via Air circulation system (Fan), thanks to which there are no temperature fluctuations. You can select standard or bactericidal lighting to lighting. The interior was made of stainless steel, thanks to which it is extremely easy to care and insensitive to corrosion or other environmental influence. Thanks Capacity 43 L Laboratory thermostat is compact and can also be used in small spaces. Thanks to the regulated height levels, the interior can be optimally used and adapt to various samples or cultures. The housing is made of durable Rolled steel, which has been covered with electrostatic coating. As a result, the outer layer is characterized by extraordinary durability. This means that the laboratory incubator withstands high loads and easily cleans.
Product features:

• - maintains a fixed temperature to 70DEG C with an accuracy of ± 1.5DEG C, the timer is adjustable 0-9999 min with an automatic switching off,
• - PID control with LCD display, RS-485 interface and air circulation,
• - interior with a capacity of 43 L made of stainless steel,
• - internal door from tempered glass with a silicone rubber gasket, an external door from steel maintained on site using magnetic strips,
• - Solid housing made of cold-rolling, electrostatically coated steel.

Technical parameters:

• - catalog number - 10030738
• - article - New
• - Model - SBS-Li-43
• - Display - LCD
• - Tension [V] - 230
• - power [W] - 350
• - internal dimension [cm] - 35 x 35 x 35
• - internal temperature [deg C] - 5 - 70
• - timer - time range - 0-9999 min
• - timer - So
• - Self-regulation PID - So
• - WARNING ON TEMPERATURE - So
• - temperature fluctuations - 1.5 DEG C
• - capacity - 43 l
• - Dimensions (DXSXW) - 52.5 x 48 x 62 cm
• - weight - 31.3 kg
• - Dimensions of shipment (DXSXW) - 59 x 56 x 78 cm
• - shipping weight - 39.7 kg
• - Dimensions (DXSXW) - 52.5 x 48 x 62 cm
• - weight - 31.3 kg
• - Dimensions of shipment (DXSXW) - 59 x 56 x 78 cm
• - shipping weight - 39.7 kg

Included:

• - Laboratory incubator
• - User manual