Inkbird ITC-308-WiFi, digital temperature and humidity controller, WiFi

Wi-Fi functions (for ITC-308 and IHC-200):

• Control using the application: Application available on iOS and Android systems. Controllers work with 2.4 GHz band Wi-Fi router. In the absence of access to Wi-Fi, you can use a cellular network or other Wi-Fi network to check / change the temperature and humidity parameters.
• Temperature and humidity tendency chart: Allows you to monitor temperature and humidity history.
• WLAN notifications: Setting upper and lower limit values will send notifications for deviations from the set parameters or probe errors.

Specifications:

• Temperature control range: -40 ℃ ~ 100 ℃
• Temperature measurement: 0.1 ° C / F (<100 ° C / ° F), 1 ° C / ° F (> 100 ° C / ° F)
• Displaying units: ° C or Fahrenheita
• Input voltage: 100 ~ 230 V AC 50/60 Hz, electricity: 10 a
• Maximum voltage: 1200 W (110 VAC), 2200 W (220 VAC)
• Ambient temperature: -20 ℃ ~ 60 ℃
• Unit storage: Temperature: 0 ℃ ~ 60 ℃, Humidity: 20 ~ 80% RH (without frost or condensation)
• The length of the power cable: 1.5 m
• Cable length: 30 cm (1 FT)

Main functions:

• 2 relay outputs, the ability to connect cooling or heating devices simultaneously
• Temperature calibration for accurate adjustment
• Compressor delay protection for cooling control
• Alarms with too high or too low temperatures
• Alarms of probe error sent to the application
• Waterproof probes suitable for contact with food

Inkbird IHC-200 WLAN Humidity regulator

Specifications:

• Humidity measurement range: 10 ~ 99%
• Accuracy of humidity measurement: 0.1%
• Accuracy of relative humidity (10% - 95% RH): ± 3% relative humidity, max. ± 5%
• Indicator unit:% relative humidity
• Working ambient temperature: -20 ℃ ~ 40 ℃
• Voltage: 100-230 V AC 50/60 Hz
• Maximum power: 1200 W (120 VAC), 2200 W (220 VAC)
• Electricity: 10 A
• Sensor length: 2 m

Main functions:

• Moisturizing and drying function
• Calibration of humidity values
• Hysteresis function
• Humidity correction
• Compressor delay protection
• Alarm in the case of deviation of set humidity values
• Water-resistant sensors / probes, preventing the mist liquidation or water vapor