Cissiyog MSJUW-29381 vacuum lifter, up to 200 kg, 20 x 10 cm

【Wide application】 This electrical glass suction cup is made of three-layer silicone material and has a wide range of applications. Compared to other rubber suction cups, most of them can only raise smooth materials, while our electric suction cup made of three-layer silicone can lift not only smooth materials (such as ceramic tiles, glass, aluminum sheets, Steel sheets, floors, etc.), but also rough materials (such as stone slabs, gypsum boards, etc.).

【Load capacity 200 kg】 This electric suction cup for glass can withstand a load of at least 200 kg and keep the suction power for at least 8 hours, which facilitates transport of materials, saving time and effort.

• Size: 20 cm x 10 cm
• Load capacity:> 200 kg
• Suction power:> 8 hours
• Material: Three layers of silicone

Application: Suitable for concave and convex surfaces, matte surfaces, rough surfaces, smooth surfaces, flat surfaces, large ceramic tiles,

Rocks, gypsum boards, glass, aluminum plates, steel sheets, etc.

【Automatic air replenishment】 This electric booth for glass boards can automatically complement the air, so you do not have to worry about the air leakage during use. Press and hold the power button to pump the air, double-click the power button to drain the air. During use, if the air leak is less than 55 kPa, automatically completes the air without having to handle manual.

【Ease of use】 This electric suction cup is easy to use. Simple steps are as follows:

1. Install the attached battery and turn on the power button.
2. Press and hold the power button to pump the air and then use the suction cup.
3. If during use the air leak is less than 55 kPa, automatically completes the air.
4. Once you double-click the power button to drain the air.
5. If the battery charge falls below 3V, "LO" appears on the display and will require charging.