Pump supporting the shower Zyiy 15g-10 100 W, 20 l / min, exhibition

Main parameters: G ¾ inch, connector size and flow switch: G ¾ inch to ½ inch. Voltage / frequency: 230V / 50Hz. Rated power: 100W. Flow: 20lpm (4,4gpm). Maximum lifting height: 10m (32.8 ft). Pump head: copper. Engine cable: 100% copper. Shaft: stainless steel.

Design advantages: The lifting pump for hot water with the switch can automatically adapt to your needs, increase the pressure, keep a constant pressure, save energy, work without leaks, quietly work, reduce cold water and waiting time.

Function: The pump solves the problem of poor water pressure in the shower. When the pressure of tap water is too low, the pump can increase it. It can also increase water pressure and circulation for industrial equipment and increase the level of oxygen in ponds and aquariums. The best feature is that it can suck water from one or two floors below, solving the problem of lack of water on the upper floors when the lower floors have water.

Easy assembly: All you need is a key to connect the pump to the pipeline, which saves the hydraulics costs. The pump shaft should be set horizontally after installation.

Application: this is a great choice for home needs related to water pumping. It can improve the efficiency of showers, taps, washing machines, boilers and other devices. It can also be used to pump water to the garage, filling the joints and increase the pressure in garden hoses.

Specifications:

• Model: 15g-10
• Voltage: 230 V / 50 Hz
• Power: 100 W Exit: ¾ "× ½" Maximum lifting height: 10 m / 32.8 Feet
• Maximum lifting height: 10 m / 32.8 Feet
• Maximum flow rate: 20 l / min, 4.4 GPM
• Speed: 2860 rpm
• Black round cable: 1 m (3,28 feet)
• Object size (length × width × height): 21.9 × 13 × 12.8 cm / 8.6 × 5.1 × 5 inches