Modular telescopic lance 280 cm + set 6 nozzles with fast connectors + two angular lances
Connection to a pressure gun with M22x1,5 mm thread. LANCA Equipped with an outer thread M22x1,5, so a gun with an internal thread is needed to connect. The hole inside the fastening has a diameter of 14 mm.
Long Lancer is an ideal solution for people who use pressure washers not only for car wash or terraces, but also to clean up to higher places, such as roofs, gutter, facades, etc.
Thanks to the modular construction, the LANCY length can be adjusted depending on the needs - a single pipe has about 37.5 cm in length - the maximum length of the lance is 280 cm.
Contents of the kit:
- Six modules, each with a length of approx. 37.5 cm, including one with a plastic handle
- One end module with a length of approx. 40 cm with a quick coupling (for connecting angle lanc or nozzles)
- Two angular lance with quick connectors and nozzle sockets
- 10 spare O-ring for connections between modules
Technical data:
- Maximum length: 2.8 m
- Minimum length: approx. 0.8 m
- Nozzle fixing: quick coupling socket
- Mounting of a gun: Karcher K bayonet
- Maximum flow: 10 l / min
- Maximum pressure: 160 bar
- Maximum temperature: 60 ° C