AUTOAQUA SMART ATO DUO Automatic relay

What can SMART ATO DUO can be used?
- Water donkey from the reserve tank to the main or SUMP "A
- Automatic filling of tanks

Do not worry more that again the relay will break and overflow your tank. From now on, this clever gadget will watch over it. Just mount the optical sensor on any tank / bucket / jug, and the water will fill it up to the level of the eye. No tools are required for installation. In addition, there is no vocational float valve (toilet), which could be a failure.

Optical sensor and assembly method:
It's a much better solution than a regular swimmer! But that's not all. The sensor from the AUTOAQUA set has a double "eye" thanks to which it has a double control over the situation.
Sensor is installed quickly and easily, using a strong magnet. Therefore, you can install an eye anywhere. Maximum thickness of the glass 12.7mm

QST security program (Quick Security Technology):
The intelligent relay will not allow to transfer the tank, even in the event of a system failure. Why? If the first filling of the tank lasted 10 seconds, no further can exceed 60 seconds. So, it allows a maximum of 6 x more than the first time. In this way, we exclude the ability to translate the aquarium in the event of a sensor failure or a dirt, a computer error was excluded and protects the pump before drying in the case of emptying the reserve.

Use the touch button (Duo on your computer) to "cancel" alarm.

Other security:
With the help of audible signals and a combination of color LED light, the computer will inform you about any possible problems. For example: a badly connected pump, erroneous contradictory eye readings - possible dirty eye, no refill from 72h and other cases dependent and not dependent on Smart ATO Duo.

In addition, in the set we will find an air inlet installed on the tube in the reserve tank. It allows you to get rid of water from the tube when the pump does not work.


What's in the set?
- "eye" sensor on a cable with a computer
- power supply
- water pump
- Original packaging
- hose holder
- 200cm hose
- fitting - air inlet

Pump power:
- Efficiency: 280l / h
- Lifting pole: 250cm
- Power consumption: 4.8W