Electronic Supreme TDS meter

A modern, professional, electronic TDS tds Meter Supreme, enables very accurate TDS measurement (PPM), with conductivity (μm) or water temperature (° C).

The TDS meter is irreplaceable when assessing the quality of the water subjected toxic filtration. Based on the results of the tester, it is possible to determine whether the osmotic membrane works properly.

The TDS meter measures the amount of salts dissolved in water or its conductivity, the lower the result of both parameters, the water more clean. With the meter, the raw water measurement can also be made.

The device is equipped with the "HOLD" function, which after pressing the button blocks the result displayed on the screen, thanks to this, the reading of the tested parameters is possible after removing the device from the tested water sample.

Clean water, eg after osmotic filtration has a very small amount of dissolved substances, therefore the result administered in PPM or μm should be at a low level, along with the increase in the amount of dissolved substances the tested water sample will have a larger TDS and conductivity.

Specifications:

• Battery type: CR2032 (up to 1000 hours of work)
• Illuminated LCD screen: 34 mm x 17 mm
• TDS level <40 ppm (green light)
• TDS level> 40PPM (red light)
• TDS measurement range: 0 - 4999 ppm, accuracy +/- 2%
• EC measurement range: 0 - 0.9999 μS, accuracy +/- 2%
• Temperature measurement range: 0-99 ° C, accuracy +/- 0.1 ° C