AUBULL DT-2000 W voltage converter, ring transformer, 110 V voltage converter for 230 V, Step Up Down converter, 50-60 Hz

Information about this product

• The 2000 converter is only suitable for electrical devices without engines below 1100 W or electrical devices with engines below 740 W. Transformers transform only voltage and not the frequency of Hertz. If your device is not compatible with 50/60 Hz frequency, the use effect is limited.
• A miniature switch (MCB) is installed in the event of an overload or short-circuit MCB starts. After starting, press the Reset switch again to continue using. MCBs are much more sensitive to overcurrent than fuses. Unlike the fuse, replace the blown fuse. That is why it is safer and easier to use.
• Some electrical appliances, such as heating devices, electrical tools, coffee machines and laser printers, require 2-4x printing performance during startup. We recommend using a 3-fold performance coefficient for high-power heating devices, such as air conditioners and welding equipment.
• Before use, check that the 110 V / 230 V connector in the back is compatible with the given voltage. If it is inconsistent, set it in the right position.
• On the front of the device there are four sockets, including two 230 V sockets and two 110 V sockets.