MK14 TW14 2.5m welding holder with SGA MIG Migomat valve

The length of the power cord assembly is 2.5 meters including 2 m working (length from the nozzle to the tray).

• The handle is used in MIG / MAG welding semi-automatic semi-trailers without a euro socket that is not equipped with a shielding gas electrical electrode
• Designed for manual MIG and MAG MAG Welding in the gas wire and a self-welded wire
• Equipped with a steel wire guide which is more durable than teflon
• Voltage wires made of copper
• Connection inside the welding device as in Welding Semi-automates of Einhell 130, 145, 170, BT-GW 150 BASS POLSKA 150, 170 DEKATECH MIG 155 PROFIMIG 160, 161, 180 Telwin. Directly to welding machine for the wire feeder. An example of assembly in the pictures below
• You can adapt to other welding semi-trailers with a similar connection of the handle in the wire feeder. The handle has a gas valve in a handle.

Technical data:

• Holder with a length (total): 2.5m (2m working)
• Wire diameter - 0.6 - 1.0mm (in the set current tip 0.8mm)
• Gas nozzle, TW14 / MB15 tip
• Current load: 140a
• Refrigeration: shield
• Execution: Standard Binzel MB14 / 15