Plastic welding machine

230

Very strong - maximum power 100W!

Included:

• DN-F1350 100W welding machine
• 4 types of staples - 100sztuk each
• The end of the "iron" for smoothing
• Suitcase
• Pincers
• Nożyk

Uses resistance cavities (staples) to thermal plastic connection

It is suitable for repairing and strengthening damaged plastics of various types. He is listed both in repairing everyday equipment and for example cars such as bumpers or dashboards, garden toolbox elements (eg Koszarek).

The "Iron" tip smoothing is ideal for finishing connections. It allows you to smooth sharp welds, plastic burrs, cracks and not only. It is fastened to press.

The set includes staples that enable work with various types of damage - depending on the type of welding, the relevant shape of the patch must be selected. There are staples for work:

• internal angular - adapted to connect plastics at an angle from the inside
• external angular - adapted to combine plastics at an angle from the outside. Before use, it can be gently profiled to match the surface
• Simple - thin tip to the least demanding work. Gently wavy
• Complicated - firmly undulating grot for the most demanding connections. The wavy shape ensures the most powerful combination force thanks to the largest plastic contact surface

Staples are in sizes 0.8mm and one pattern "W" in size 0.6mm

Technical data:

• Power: 230
• Maximum power: 100w
• Number of staples included: 400szt (100x each type)
• The length of the electric cable: 160cm

Principle of operation:

Mount the selected tape on the device - after pressing the trigger, the tab will start to heat. After reaching the appropriate temperature, the tip should be made into a damaged plastic to reinforce or connect items. For some connections you have to use a few tips for the best efficiency. After entering and cooling the tip, it bends manually, without using tools. Sam will give in the right place. If it does not make it according to the plan, you can cut the tips with attached censions.