Lossless CO2 reactor with a diffuser and large biobale
The plastic CO2 reactor is a lossless reactor. It can be used inside the aquarium by connecting it to a circulation pump or out of the aquarium, connecting it to an external filter. Dissolving CO2 facilitate large biobale in the reactor. The 32cm length reactor consists of 3 modules of 9cm, which can be disconnected by reducing its length. In the set they were attached two L.
Dimensions:
Height 32cm
Diameter 5cm
Principle of operation:
On the upper part of the reactor to a 4 / 6mm hose connection, the CO2 hose is connected, which provides carbon dioxide to the diffuser. CO2 maintains in the upper part of the reactor, and the water flowing through the reactor until the bottom dissolves carbon dioxide. Trapped carbon dioxide is dissolved 100%. The diffuser has a water jet input and a 12 / 16mm hose. It connects it with a pump or filter using a hose or with the help included in the set L.
The reactor can be used in 2 ways:
Inside the aquarium - the upper input is connected directly with a hose or with a fitting to outlet an internal filter or a circulating pump. Water rich in carbon dioxide comes out with the lower output. The reactor can be used inside the aquarium, in the filtration panel, in sumpe etc.
Outside Aquarium - the reactor must be connected to the external filter outlet. To do this, cut the outlet hose of this filter in the right place. The upper reactor input is directly connected to the hose or with a fitting to a part of the hose from the external filter and the bottom to the part of the hose running to the aquarium. The flowing water through the reactor is enriched with CO2. Do not place the reactor into an external filter inlet hose to exclude the filter. The diffuser has a modular structure, so to connect it outside the aquarium, connecting the modules to seal the silicone.