Peleciarka Press for the production of pellets sawdust PAS II 120 mm 100 kg / h 2200 W

Manufacturer's code: 10280532
Wiesenfield Marker It will allow to produce up to 100 kg of granules over an hour. And thanks to the working time up to 24 hours, even large quantities can be made. Samu should decide what vitamins and minerals will be added to maize, oats or hay. During the vacuum heat treatment, the pellets press was warmed up to 60 to 80Deg C. This means that the granulate surface does not deceive damage or deformation during heating. After reaching the appropriate temperature, the raw material from which fertilizer or feed is made. Then, two massive rolls will turn it through a form with a diameter of 120 mm. As a result, it is produced strongly compressed, a lasting pellet with a diameter of 2.5, 4 or 6 mm. The size depends on the selection of the matrix attached to the scope of delivery. If you need a pellet with a different diameter, you should stock up a suitable matrix. The practical leaving gutter will facilitate the pouring of finished granules directly to the bags. The control panel is transparent and intuitive to use. The molder is equipped with an electric motor with a capacity of 2200 W, and thanks to four solid wheels, you can move it to any place. The device is powered by 230 V voltage, so the granulator can be connected to a standard socket without any problem. Note: It is also best to order a glue for the production of pellets (art.: 10530000). Powder wheat starch will facilitate ironing and storage of granules. Note on consumables: Matrix dies and clamping rollers can be used up to 300 hours. If they are worn, replace them immediately.
Product features:

• - The Capler will produce a pellet for feeding or fertilization,
• - at work time of 24 hours, the pellet press will produce up to 100 kg / h,
• - the 800 granulator engine will ensure speed 1400 rpm,
• - thanks to heating to a temperature from 60 to 80DEG C, the industrial pad will guarantee a longer shelf life of the granulate,
• - Pellet press is compact, mobile and easy to use.

Technical parameters:

• - catalog number - 10280532
• - article - New
• - Model - -Knows pm-3200
• - Material - Steel
• - Color - Blue
• - Tension [V] - 230
• - IP protection degree - Ip44
• - wheel size [mm] - 90
• - Size of the load box [mm] - Ø280
• - Feed production efficiency [kg/h] - 100
• - power [W] - 2200
• - Number of matrices - 3
• - Diameter of the matrix hole [mm] - Ø 2.5 / 4/6
• - Continuous working time [h] - 24
• - Insulation class - Breakfast
• - Protection class - And
• - operating temperature range [deg C] - 60 - 80
• - Device work cycle - S1
• - Maximum power - 2.2 kW
• - Diameter of the matrix - 120 mm
• - Wheels - So
• - Emergency switch - Not
• - rotational speed [obr./min] - 1400
• - Dimensions (DXSXW) - 88 x 30 x 69.5 cm
• - weight - 83.3 kg
• - Dimensions of shipment (DXSXW) - 81 x 29 x 54 cm
• - shipping weight - 94.8 kg

Included:

• - Weleciary
• - 3 matrices (Ø 2.5, 4, 6 mm)