Block coal cartridge GLOBAL WATER GW-BL-BB10

Inserts made of sintered activated carbon that removes from water from 98% to 99% free chlorine, chloropathic solvents, aromatic hydrocarbons (improve the taste and smell of water), as well as up to 85% Pesticides of chloropooling, multyaromatic compounds, phenol, benzene and organic substances.

Sintered carbon has a much larger specific surface, as well as the number of active centers, thus approx. 25% greater usable productivity with respect to other carbon inserts. In addition, it is possible to filtrate mechanical pollutants with a grain size up to 3 μm. Carbon cartridges are particularly recommended for surface water treatment.

The cartridge is intended for the treatment of cold drinking water.

Inserts used as standard in BigBlue 10 ". Before first use, we recommend soaking the water cartridge for about 1 hour or rinse with water for a few minutes. Thanks to this, the cartridge does not give the active degree of filtration of active carbon particles.

Recommended flow - up to 24 liters per minute.

Inserts should not be used for water polluted with microbiologically and unknown origin. In order to extend the viability, install the body with a mechanical cartridge before the body with a carbon cartridge.

Advantages of carbon cartridges:

• They remove up to 99% free chlorine from water
• They remove organic impurities
• Fenol and benzene from water
• They remove up to 85% of chloropathic pesticides
• They remove mechanical impurities (rust, squeaks, mules, suspensions) to 3 μm grains
• They improve the taste and smell of water

Technical data:

• Height: 25 cm
• Diameter: 11.5 cm
• Working temperature: 2-45 ° C
• Recommended flow: up to 24 l / min
• Lifetime: up to 6 months *

• 
  * The lifetime of the cartridges may change, depending on the quality of raw water. The above-recommended exchange terms relate to standard operation and do not include random cases such as water supply network failures or excessive pollution of well water.