Cooling system pressure measurement of GotLuck 28 TLG, Used

Note !!! Incomplete set !!!

A professional set of heat sink tools - contains 26 elements of a universal pressure kit for the cooling system and a vacuum kit, including a leak detector with a heat sink, a coolant topping tool and a thermometer for leak detection, supplementing the coolant and temperature measurement.

Adapters for heat sinks - A vacuum kit for completing the liquid and testing of leaks with a heat sink contains a total of 21 colored radiators for heat sinks, including 17 special radiators for heat sinks, 1 universal conical adapter and 3 Aluminum adapters for corks for checking the tightness of the heat sink and replenishment of the coolant. They are suitable for almost all types of holes in radiators in classic and modern vehicles.

A coolant topping tool - a coolant topping tool has a range of -30 to 0 inches Hg (-76 to 0 cm Hg) (usually -25 to -20 inches HG is the right torque to be completed Cooling). The cooling fluid leakage tester increases the pressure in the tank / plug and if the indicator falls, it means leakage in the system. Connect the vacuum tool that fills the coolant to the vacuum pump, the air will be pumped out and the vacuum formation pulls the coolant to the cooling system.

Detroit Leaker Leak and Thermometer - Manual pressure tester in the heat sink (range: 0-35 PSI / 0-2.5 bar) with a fast disconnection system can be a shortcut to control the seal by observation or indicator Pressure moves. A stainless steel thermometer (0-200 ° C / 32-400 ° F) measures the temperature of the coolant.

Easy to use and organizations: All adapters are colored and placed in a designated place, which facilitates the selection in accordance with marked images in the instructions. Safely and decent stored in a premium, well-organized box that can withstand high stress without deformation.