The IWAX DIAMOND WAX HEATER WHITE is a professional device designed for melting wax for skin epilation. It supports regular wax, wax pearls, blocks, and paraffin wax.
It has a transparent lid to monitor wax melting, preventing overheating and dust accumulation. The temperature can be adjusted from 35 °C to 120 °C with a control knob. A control lamp indicates when the device is on, and a click system produces a sound when turning the heater on or off.
Wax is melted in an easy-to-pull aluminium container. The melting time ranges from 10 to 30 minutes depending on the temperature. Users should always check the wax temperature before application to avoid burns.
1. Connect the device to a power supply and place wax beads or canned wax in the aluminium container, then place the container in the heater.
2. Turn the knob to ON; the red light will indicate the heater is operating.
3. The light will cycle on and off to maintain the set temperature.
4. Allow 10 to 30 minutes for the wax to melt.
5. Always check the temperature before applying wax to the skin.
6. After use, switch off the device and allow it to cool before cleaning.
7. Only clean the device when it is disconnected from the power supply.
