Efficient airbrisor for airbrush + fan

Model compressor for AS18-2S Aerograph with a built-in fan.

Piston compressorless, designed for each type of airbrones, the advantage of this model is a built-in fan, which ensures better cooling.

Used in cosmetic salons, the tattoo usually in modeling and on minor painting works.

Technical data:

• Designed for airbrones with nozzles: from 0.2 to 1.0 mm
• Power: 1/6 HP, ie 125 W
• Auto Start / Stop: 3 Bars / 4 Bars
• Performance: from 20 to 23 l / min
• Connection thread: 1/8 "Dimensions: 270x140x200 mm
• Weight: 3.5 kg

Praca- The compressor works with 2,0mm nozzles with 2,0mm. Thanks to the high efficiency, the ribbed structure of the cylinder and the fan - you can paint all the time without interruptions.

Control and security A set of air preparation integrated with a compressor gives you the ability to fully control pressure and dry air on the output.

Auto Start / Stop - A very useful feature that does not only save electricity and extend the compressor life, but above all increases the comfort of work.

Noise, thermobe In compared to other compressors with similar AS18-2 parameters, it is definitely more quiet. In addition, this compressor is equipped with a thermal switch that prevents the piston.

Cooling, switch- The entire housing is designed to remove the heat outside the compressor. A well-shaped switch is on when the compressor is turned on.

Rubber legs- They play a fundamental role in this compressor. Their shape and implementation material affects the suppression of vibrations caused by the piston. Also increase the adhesion of the compressor to the substrate.

Uchwyt- It gives you the ability to transfer the compressor even during short breaks at work, when the cylinder takes on high temperatures