Aerograph compressor LS-186S LS-186S fan 3L cylinder

Aerograph compressor with 3L - LS-186S bottle

The fan inside the housing allows for a longer work Compressor and extends its lifespan!

Compressor piston - For each type of airbrones with the possibility of continuous operation, with a thermo switch. Used in cosmetic salons, the tattoo usually in modeling and on minor painting works.

Work - The compressor cooperates with aerographers with nozzles from 0.2 to 0.8mm. Thanks to the high efficiency and begged cylinder design (cooling), you can paint all the time without interruptions. The cylinder stabilizes the air (no pulsation)

Control and security - A set of air preparation integrated with a compressor gives you the ability to fully control pressure and dry air on the output.

Auto Start / Stop, Safety valve - The compressor turns on when the pressure in the tank is below 3 bar and turns off when it reaches 4 bars. An additional cylinder is secured with a safety valve (red with a dot)

Noise, thermo-fuse - The compressors of other AS-186 manufacturers are definitely more quiet. In addition, this compressor is equipped with a thermo-switch that prevents the piston.

Cooling, switch - The entire housing is designed to remove the heat outside the compressor. A well-shaped switch is on when the compressor is turned on.

Rubber feet- They play a fundamental role in this compressor. Their shape and implementation material affects the suppression of vibrations caused by the piston. Also increase the adhesion of the compressor to the substrate.

Handle - Gives the possibility of moving the compressor even during short breaks at work, when the cylinder takes on high temperatures.

Technical data:

• Designed for airbrones with nozzles: 0.2 to 0.8 mm
• Power 1/6 HP, ie 125 W
• Auto Start / Stop: 3 bars / 4 bars
• Performance: from 20 to 23 l / min
• Connection thread:1/8 "
• Cylinder capacity: 3 liters