Jingye Nose Pump 2 - 2000L / H Pump

Nose Pump Advantages:
- quiet work
- High performance and lifting pole
- for continuous work 24/7
- ceramic axle
- A set of fittings
- two interchangeable "noses"
- Work in full immersion
- Work in a shallow dipping
- Work outside water

Why does the pump have a nose?
Thanks to the overlay, called the "nose" colloquially, the pump gets water from the nearest area of the tank DNA. Thanks to which it is a low (shallow) pump, and this means that only a few centimeters of water are enough to work.

Big and small nose:
In the set you will find two types of nose. A large nose gains water only from the bottom of the tank and has a filter grille that prevents the pump blocking through a large element, e.g. a pebble.
Smaller with noses can download water from any 360ST direction. It makes it much easier to set the pump in small tanks, such as SUMP.

What can the pump can be used for:
First of all, it is adapted to work in marine tanks. In the sumpie, the nose pump becomes irreplaceable.
In addition, it can be used:
- Sump marine and freshwater aquarium
- Water pond
- Pool as reflection of DNA
- Aquaristics as a pump for water replacement
- technical and hydraulic devices and installations

Work in full immersion and except water:
The pump can work completely immersed in water. In addition, thanks to connectors from the set you can mount a pump outside the water, directly connected to the inlet and outlet hose.

Ceramic axis:
This is the basis for marine aquaristics. Of course, it also works well in fresh water. The ceramic axis will never rust. Over this, it does not heat up, does not change its volume, guaranteeing a quiet job.

What's in the set:
- 2000L / H performance pump
- Two NOS "overlays
- two outlet nozzles with an outer diameter of 16mm and 20mm on the hose
- Inlet pipe with an external diameter of 20mm
- gasket for the outlet connector - already founded
- Gasket for the inlet connection if you want to turn a nose
- 4 x suction cup
- Product packaging
- EN statement

Technical data:
- Efficiency: 2000l / h
- Power consumption: 40W
- water lifting pole: 2.2m
- maximum dimensions (with the largest nose and nozzle at the top of the pump): 14x12x15cm
- Power cord: 200cm

- producer: Jingye
- Manufacturer's code: JY-9400DX
- Trade name: Nose Pump 2