RO1 Glamor OSMOZA System of Reverse Osmosis RO

RO1 Glamor System Reverse Osmosis

The reverse osmosis system is equipped with an additional filter for a membrane to remove the smallest remains of silicates and nitrates. As a result, it is possible to obtain water with a retention factor over 99% and the total amount of dissolved solids, TDS loved one or even 0.

The filter replacement in the reverse osmosis system is childishly simple. The integrated LED filter indicator informs you to replace the filter cartridge. Thanks to the right system, filter cartridges or membrane can be replaced in just 30 seconds. The system produces up to 380 liters of osmotic water per day in optimal conditions.

The system provides real-time information on the LCD display of the quality of water produced from Osmosis, TDS in PPM. For maximum security, the reverse osmosis system has been equipped with a water leak sensor. If a leak is detected, an audible alarm is activated and the reverse osmosis system stops working.

Characteristics:

up to 380 l / day
Only 15 cm wide
Specially designed for freshwater and sea aquariums
with deionization filter
Integrated LED Filter Exchange Indicator
The filter replacement is child'sly simple in 30 seconds
Shows information about the quality of osmotic water in real time
Maximum safety thanks to the water leak sensor (automatic shutdown + alarm liberation)
Includes a tap adapter - 3/4 inch thread - press 1/4 inch
Input voltage: 110-240V / 50-60Hz -1.5a
Output voltage: 24V-1,5A
Production of clean water at 24h at 25 ° C: approx. 100 GPD (380 L / day)
Wastewater per liter of water produced: approx. 1.25 l.
Maximum amount of dissolved particulates in TDS: = 2000PPM
Inlet pressure: 0.5-4 bars
Temperature on the inlet: 4-45 ° C
Maximum chlorine content on the diaphragm inlet: = 0.1 ppm
Dimensions: height 39 cm x width 41 cm x depth 15 cm
Weight: 8.8 kg