Machine for cutting styrofoam with thermal knife length 1350 mm depth. 320 mm 200 W - set

Manufacturer's code: 10062724
Machine for cutting brand styrofoam MSW This optimal insulation machine is used by a hot wire that can be used for medium-sized renovations and large buildings. The model was developed for cutting of polystyrene, styrodur or polystyrene with millimeter precision. With the device you can easily cut even large boards up to 1350 mm and a depth of up to 320 mm. Thanks to the attached handle, which tilts over 90deg, the cutter can be used not only in the workshop, on the floor, on Europalets or leaning against the wall, but also safely on scaffolding. Due to a laser scale and a ball guide with a length of 100 cm, the machine can be used for very precise work. This model also has the option to adjust the length, depth and cutting angle. The ability to tilt a long bracket will allow you to cut the exact cutting of both horizontally and vertically. Depth limiters ensure that the material will lie flat and safely even after tilting. The machine also has pre-installed latches to accurately repeat the same cuts. The set includes a styrofoam knife with two blades. Working temperature is set to 16 levels up to 500DEG C, with a strong transformer to ensure fast heating within 5 - 10 seconds. Ergonomic handle and long cable (3 m) will provide flexible operation. The attached blades are additionally hardened and readily replace them with the Allen key. The pendant will be useful when there is a need to use both hands to transfer larger insulating boards. The device and accessories are delivered in a handy suitcase with a handle that facilitates transport.
Product features:

• - a styrofoam cutting machine for easy treatment with clean edges to a length of 1350 mm and a depth of 320 mm,
• - thanks to the guide, laser scale and adjustable cutting depth with a styrofoam cutter, accurate results can be obtained,
• - a styrofoam cutting device with an IP68 protection degree will result in adverse weather conditions,
• - the device can be tilted by 90deg, and thanks to the handle on the scaffolding, it works perfectly on construction sites,
• - in addition to the styrofoam guillotine in the set there are five cutting wires made of high quality nickel-copper-chromium alloy, as well as five styrofoam holders and grinding spreaders,
• - Knife for 250 W styrofoam, with 16 levels up to 500Deg C, 2 blades and a 3 m long line.

Technical parameters:

• - catalog number - 10062724
• - article - New
• - Model - MSW-Su-GIL E1 S1
• - Material - Aluminum, Coated plate, Nickel-copper-chromium alloy
• - Color - Black, Silver metallic
• - angles [deg ] - 90
• - power [W] - 200/250
• - Maximum temperature [deg C] - 500
• - Transformer - 37 V / 200 W
• - Depth of cutting [mm] - 320
• - Protection class - Ip68
• - power supply [V] - 230 V
• - Power cord - 3 m
• - Maximum cut length - 1350 mm
• - Thermal protection - So
• - Dimensions (DXSXW) - 93.5 x 111 x 164 cm
• - weight - 15.8 kg
• - Dimensions of shipment (DXSXW) - 47 x 170 x 17 cm
• - shipping weight - 18.6 kg

Included:

• - Styrofoam cutting machine
• - 5 cutting wires
• - Scaffolding bracket
• - 5 styrofoam holders
• - grinding tank
• - knife for styrofoam
• - 2 blades (150/200 mm)
• - brush
• - Allen key
• - Transport suitcase