Welding holder 4m SGA TW14 MK14 with gas valve for Mig Mug Mig

Welding handle complete TW14 type - length 4m

• The handle is used in MIG / MAG welding semi-automatic semi-trailers without a euro socket that is not equipped with a shielding gas electrical electrode
• Designed for manual MIG and MAG MAG Welding in the gas wire and a self-welded wire
• Equipped with a steel wire guide which is more durable than teflon
• Voltage wires made of copper
• Connection inside the welding device as in Welding Semi-automates of Einhell 130, 145, 170, BT-GW 150 BASS POLSKA 150, 170 DEKATECH MIG 155 PROFIMIG 160, 161, 180 Telwin. Directly to welding machine for the wire feeder. An example of assembly in the pictures below
• You can adapt to other welding semi-trailers with a similar connection of the handle in the wire feeder. The handle has a gas valve in a handle.

The handle has a metal wire guide, For welding light alloys (eg aluminum), it is recommended to use guide cartridges made of teflon.

Current cable (current vein) is made of copper What translates into greater durability and an increased working cycle compared to the wires made of aluminum covered with copper in CCA technology.

Technical data:

• Total length holder: 4m
• Working length: 3,4m
• Wire diameter: 0.6 - 1.0mm (in the set current tip 0.8mm)
• Gas nozzle, TW14 / MB15 tip
• Current load: 140a
• Refrigeration: shield
• Execution: Standard Binzel MB14 / 15