Silent AF18-2 Aerograph Aerograph Auto Stop Fan Thermal Switch

Model compressor for AF18-2 aerograph

New with cooling fan AF18-2. A quiet fan mounted inside the housing

Piston compressor of oil-free to each type aerographs, has termowyłącznik. Used in cosmetic salons, the tattoo usually in modeling and on minor painting works

Work - Compressor cooperates with aerographers Nozzles from 0.2 to 0.8mm . Thanks to the high efficiency and begged cylinder design (cooling), you can paint all the time without interruptions

Control and security - A set of air preparation integrated with a compressor gives you the full opportunity Pressure control and dry air on the output.

Auto Start / Stop -A very useful function thanks to which not only We save energy Electric and extend the life of the compressor, but above all increases the comfort of work.

Noise, thermobe -In compared to other compressors with similar AS18-2 parameters, it is definitely more quiet. In addition, this compressor is equipped with a thermal switch that prevents the piston.

Cooling, switch - The whole housing is designed to run out compressor. A well-shaped switch is on when the compressor is on, compressor It has a fan.

Rubber legs-They play a fundamental role in this compressor. Their shape and implementation material affects the suppression of vibrations caused by the piston. Also increase the adhesion of the compressor to the substrate.

- It gives you the ability to transfer the compressor even during short breaks at work, when the cylinder takes on high temperatures

Technical data:

• Designed for airbrones with nozzles: from 0.2 to 0.8 mm
• Power 1/6 HP, ie 125 W
• Auto Start / Stop: 3 bars / 4 bars
• Performance: from 20 to 23 l / min
• Connection thread: 1/8 "
• Volume: 47dB

Compressor dimensions:

Total length: 24.5 cm

Total height: 20.5 cm

Total width: 14 cm