Plastic plastering aggregate 30 bar 40 L 18 L / min 2800 W

Manufacturer's code: 10062635
Brand plastering aggregate MSW It allows you to impose a water plaster based on plaster, lime or cement without effort. The rotor on the device provides an ideal consistency that can be applied to the wall under the working pressure Up to 30 bar. In this way, the mortar stays on a vertical surface and creates a equal layer that is enough to smooth. Operation of plastering machines is extremely easy and provides maximum freedom of movement. Just connect it to the compressor and set the input pressure using the air reducer. The direction of rotation and rotor speed are set on a readable control panel depending on the type of material and the amount of water used to obtain the mass. The device achieves the best results with granularity material up to 3 mm. Snake for the treatment has a length 10 mSo that you can easily lead the spray gun during the application. Depending on the type of mass, a suitable nozzle should be selected. Note: A air compressor is needed to operate the machine. Depending on the material, we recommend a compressor with a power from 3 to 7.5 km. The container for plaster has a capacity 40 liters, which allows you to cover even large surfaces at flow 18 l / min No long breaks. The container cover provides cleanliness during operation. Four wheels They enable an easy transport of plaster machine to place. Compact dimensions of the aggregate are ideal for use on scaffoldings. After completing the work, you can easily clean the device with water and attached cleaning balls in just a few moments.
Product features:

• - at a working pressure 30 bar, the plastering aggregate evenly distributes to the wall to 18 l / min mortar, plaster or cement,
• - dry material such as plaster or lime with granules up to 3 mm can be mixed with the addition of water in a plastering machine to obtain a suitable mass,
• - 40 L tank allows for a seamless operation on large surfaces using a plastering aggregate,
• - a 10-meter hose and an easy-to-use spray gun ensure optimal freedom of movement during operation,
• - Four wheels facilitate the transport of a plastering aggregate whose compact shape and dimensions will fit on scaffolding.

Technical parameters:

• - catalog number - 10062635
• - article - New
• - Model - MSW-Pu-30
• - Power type - Network
• - Material - Rubber, PP, iron
• - Color - Blue, white
• - Tension [V] - 230
• - IP protection degree - Ip54
• - power [W] - 2800
• - Working pressure [bar] - 30
• - Maximum working pressure [psi] - 435
• - speed of rotation [obr./min] - Engine: 0 - 2500 Roter: 0 - 160
• - IEC protective class - And
• - Power cord - 2.5 m
• - Hose length - 1000 cm
• - flow - 18 l / min
• - air pressure - 10 bar
• - Pumping height - 20 m
• - maximum capacity - 40 L
• - Number of rollers - 4 PC
• - Diameter of wheels - 200 mm
• - Wheels - So
• - length of the compressed air wire [m] - 15
• - Dimensions (DXSXW) - 102 x 49 x 63 cm
• - weight - 60.7 kg
• - Dimensions of shipment (DXSXW) - 102.5 x 32 x 73 cm
• - shipping weight - 64.5 kg

Included:

• - plastering aggregate:
• - Mixing pump
• - Spray gun
• - 4 metal spray nozzles
• - 6 cleaning balls
• - Sealing tape
• - EU compressed air adapter
• - Snake for mortar (10 m)
• - Compressed air hose (15 m)