Manufacturer's code:
10090242
Mark's immersion pump Hillvert It will work for emergency dewatering and drying rooms, joints, swimming pools or wells. An efficient engine has
Power 750 W. Moves water with flow
11 m3 / h. The pumping height is
8.5 m. Immersion depth
7 m It makes it also suitable for a well. Easily sucks a particle with size
up to 5 mm. The device housing was made of
stainless steel, it is resistant to corrosion and dirt. The length of the power cord is
10 m. The float switch pump allows you to automatically turn on and off depending on the water level. The lowest possible level to run is 35 mm, sucks to level 11 mm. The pump is suitable for
Connections: 1 '', G1 '', 1 1/4 '', G1 1/4 ''.
Product features: - - high performance thanks to the 750 W motor,
- - made of stainless steel resistant to corrosion,
- - the float switch adjusts the operation depending on the water level,
- - to pump out water from wells, joints, swimming pools, flooded basements,
- - For connections: 1 "G1" 1 1/4 "G1 1/4".
Technical parameters: - - Model - Ht-sp-750w-11000
- - Producer code - 10090242
- - Product condition - New
- - Tension [V] - 230
- - Maximum lifting height [m] - 8,5
- - power [W] - 750
- - Maximum submersion depth [m] - 7
- - Maximum waterflow [m³/h] - 11
- - Maximum working pressure [bar] - 0,85
- - Power cord [m] - 10
- - housing material - Stainless steel
- - Maximum water temperature [deg C] - 35
- - IP protection degree - Ipx8
- - Maximum particle size [mm] - 5
- - water connection diameter - 1 "G1" 1 1/4 "G1 1/4"
- - Dimensions (DXSXW) [cm] - 13 x 13 x 34
- - weight [kg] - 5.7
- - Dimensions of shipment (DXSXW) [cm] - 23.5 x 18.5 x 33.5
- - shipping weight [kg] - 6.2
Included: - - immersion pump
- - User manual