Manufacturer's code:
10021418Plasma cutter
S-plasma 60U It has a transparent control panel with screen
Led And the manometer instantly informs about parameters. With the appropriate pressure and cutting current setting, you can quickly and precisely cut different metals, such as steel, stainless steel, copper or aluminum. The current on the device is set using the knob
from 20 to 65 a. All values are shown on the reading display
Led. With maximum power values, the plasma cutter cuts elements with a thickness to
22 mm. The air pressure is controlled by means of a controller equipped with a lock. This prevents accidental change in the compressed air pressure. The current value reads on an integrated manometer. Thanks to the optimally chosen combination of air and current pressure, pure cuts with high precision are obtained. Inverter
IGBT not only provides high-power voltage output due to technology
PWMbut also reduces the weight and dimensions to a minimum. In this way, a handheld cutter with a handle can be used even more effectively. The device is useful for work on construction, for repairs in a workshop or maintenance work. The burner is lit by means of high frequency, so you can cut the grates and pilot arc. To avoid oxidation or deformation of the workpiece after cutting, select the gas outflow time
5 or 10 s. The air outflow additionally cools the burner and prevents its damage. The basic unit is equipped with a powerful fan that prevents overheating. It is recommended to connect the brand plasma cutter
Stamos Germany to the power source
400 V wire
2 m. This allows us to use it as efficient plasma cutting devices in automotive workshops, commercial companies dealing in metal processing and in industrial production. In addition, the plasma cutter also supports DIY in demanding repair and repair projects.
Note: The device is delivered without a plug. To install it, contact a qualified electrician.
Product features: - - maximum cutting current 65 A and 100% work cycle,
- - a readable control panel with a LED display, manometer and knob,
- - effective and modern IGBT inverter and Ignition HF,
- - precise, fast and non-distributing cutting to materials with a thickness of up to 22 mm,
- - Compact dimensions and handle for carrying.
Technical parameters: - - catalog number - 10021418
- - article - New
- - Model - S-plasma 60U
- - ABS material - Steel
- - Air operating pressure [bar] - 4-6
- - Cooling - Fan
- - Compressor parameters - > 0.25 m³
- - cutting width [mm] - ≤22
- - efficiency [%] - 90
- - grounding wire [m] - 2
- - Insulation class - F
- - IP protection degree - Ip21s
- - Maximum cutting current [A] - 65
- - Gas outflow time [s] - 5/10
- - Maximum cutting thickness [mm] - 22
- - Maximum entrance current [A] - 15
- - Maximum entrance current [A] - 8.6
- - Power cord [m] - 2
- - Power factor - 0.9
- - Tension [V] - 400
- - Minimal cutting current [A] - 20
- - ignition Plasma - Hf
- - Open circuit voltage [V] - 310
- - Cycle of work [%] - 100
- - Real input voltage [A] - 8.7
- - Dimensions (DXSXW) - 49 x 16 x 30 cm
- - weight - 9.6 kg
- - Dimensions of shipment (DXSXW) - 51.5 x 42 x 31 cm
- - shipping weight - 13.5 kg
Included: - - S-Plasma 60U plasma cutter:
- - AG60 burner with a wiring harness (4 m)
- - Earthing clamp (2 m)
- - Pressure reducer
- - No plug in the set