Submersible portions. Submersible steel stainless steel 400W 7000L / h to 8m

Manufacturer number: 10090088
Electric immersion pump with a capacity up to 7000 l / h, it will work when drawing water from the well, pumping water from swimming pools or water mesh etc. It can work at a depth of 7 meters at the height of the water pole of 8 meters (counting from the water level to the ground level), which facilitates the drying of even low beers.
The HT-ROBSON-SP400CW model is fully automated, so It does not require permanent user supervision. The float switch discharges water when its level rises above the specified value or switches off when the water level is normalized. Making stainless steel and hermetic protection against moisture make the device very durable.
Product features: 

• - Performance - 400 W motor and flow to 7000 l / h,
• - Strength - housing made of stainless steel,
• - Simplicity - the device automatically starts and turns off depending on the water level,
• - Convenience - the 10-meter power cord allows you to transfer the device where you need it necessary,
• - Versatility - Possibility to connect a snake in sizes 1 # 8221, 1.25 # 8221, 1.5 # 8221.

Technical parameters:

• - Model - Ht-Robson-sp400cw
• - catalog number - 10090088
• - article - New
• - housing material - Stainless steel
• - Max. Power - 400w
• - tension - 230 V / 50 Hz
• - Max. Lift height of the water column - 8 m
• - Max. Flow - 7000 L / H
• - Max. Dipping depth - 7 m
• - Snake connection size - 1 # 8221, 1,25 # 8221, 1.5 # 8221
• - length of the power cord - 10 m
• - Max. Diameter of particles passed - 5 mm
• - Max. Pumped water temperature - 35deg c
• - Dimensions (DXSXW) - 14.7 x 14.7 x 23 cm
• - weight - 3.7 kg
• - Dimensions of shipment (DXSXW) - 25 x 19 x 29 cm
• - shipping weight - 4.4 kg

Included:

• - immersion pump,
• - EN statement