Manufacturer's code:
10061173Bending machine for brand pipes MSW It will work for machining and modeling metal materials used in construction, car workshops or hobby studios. The device is suitable for shaping pipes with a wall thickness of 0.7-1.5 mm. The maximum bending range is 360DEG - 180DEG in both directions. Attached matrices with dimensions
9 mm, 11 mm, 12 mm, 15 mm, 20 mm, 22 mm. They allow you to adapt the bending machine to different materials. Thanks to them, you can bend 3/8 '', 1/2 '', 9/16 '', 5/8 '', 3/4 '', 7/8 ''. The operation takes place using a lever. The device was made of strong low-carbon steel. Assembly holes with Wed. 10 mm allow you to attach the machine to the ground.
Product features: - - in a set of matrices with standard dimensions 9 mm, 11 mm, 12 mm, 15 mm, 20 mm, 22 mm,
- - for pipes with wall thickness in the range of 0.7-1.5 mm,
- - Easy manual service,
- - flexing materials up to 360DEG (180DEG per page),
- - Made of low-carbon steel.
Technical parameters: - - Model - MSW-Trb-200
- - catalog number - 10061173
- - article - New
- - Maximum bending width - 8 mm, 10 mm, 12 mm, 16 mm, 19 mm, 22 mm
- - Material - Low-carbon steel
- - Bending range - Up to 180Deg in both sides
- - Maximum wall thickness of the tube - 0.7-1.5 mm
- - User manual - So
- - Dimensions (DXSXW) - 60,00 x 23.00 x 12.00 cm
- - weight - 13.00 kg
- - Dimensions of shipment (DXSXW) - 38.00 x 23.00 x 13.00 cm
- - shipping weight - 15.00 kg
Included: - - pipe bending machine,
- - Dies - 6 pcs
- - User manual