Service Laboratory Power Supply 0-30 V 0-10 A DC 300 W LED RS485

Service Laboratory Power Supply 0-30 V 0-10 A DC 300 W LED RS485

1018061
Out of Stock
€157.90
Tax included
Quantity

Out-of-Stock
  Secure payment

By credit card and paypal

  Easy going back

Buy safely

  Fast delivery

With online tracking

Manufacturer's code: 10021282
Laboratory power supply Stamos Soldering Used to power external devices with a solid. Equipment will work in workshops, sites, laboratories and research institutes. A large LED display allows you to easily read the set values of the output, current and power voltage. The equipment has 4 memory locations for often repeated values, which allows you to conveniently recall. The voltage is adjusted in the range 0-30 V DC A current 0-10 a. If the power supply acts as a fixed voltage source (CV), the device automatically switches to a fixed current operation (CA) as soon as the load limit is reached. This prevents damage to the connected devices. The equipment has overcurrent protection (OCP), overload protection (OPP) and protection against overheating (OTP). The integrated fan adapts to the temperature conditions on the device, thus providing optimal cooling. In addition, the audible alarm informs about the threat. Non-slip legs ensure stability of equipment on the work surface.
Product features:
  • - wide range of 0-30 V voltage, electricity 0-10 A,
  • - 4 digital LED display,
  • - 4 memory locations and RS485 interface with Modbus protocol to connect to a computer,
  • - protection against overheating, overcurrent, overvoltage, excessive load,
  • - Intelligent temperature control and automatic change from permanent permanent voltage.

Technical parameters:
  • - catalog number - 10021282
  • - article - New
  • - Model - SEC-ĺş-103
  • - current stability - CC ≤ 0.25% FS
  • - connector [mm] - 5
  • - Cooling - Fan
  • - Current regulation range [A] - 0-10
  • - Display accuracy - Voltage: 0.01 V intensity: 0.001 A
  • - Color - Gray
  • - Current current - 0-10
  • - DC voltage adjustment range [V] - 0-30
  • - fuse [A] - 10
  • - Insulation resistance [MΩ] - ≤ 100
  • - voltage stabilization coefficient - CV: ≤ 0.2% CC: ≤ 0.2%
  • - Current stabilization coefficient - CV: ≤ 0.25% FS CC: ≤ 0.25% FS
  • - Work stabilization coefficient - CV: ≤ 0.2% + 10 MV CC: ≤ 0.2% + 10 mA
  • - Working humidity [%] - ≤ 80
  • - starting current [A] - 10
  • - Security - OVP, OCP, OTP, OPP
  • - Power cord [m] - 1,5
  • - Output voltage [V] - 30
  • - resolution - 4-digit LED display
  • - Display - Led
  • - Relative permissible humidity of escaplet and storage [%] - ≤ 80
  • - Accuracy of parameter settings (25DEG C ± 5DEG C) - ± 1% FS ± 1
  • - Memory - 4 locations
  • - Tension [V] - 230
  • - power [W] - 300
  • - power [W] - 300
  • - Response time to the increase / voltage / current decrease (at 10% load) [ms] - 400
  • - a connection to a computer - Rs485
  • - Rated entrance current [A] - 1,7
  • - Rainting - CV: ≤ 50 MV RMS CC: ≤ 30 mA RMS
  • - voltage range [V] - 0-30
  • - storage temperature [deg C] - -20 - +85
  • - voltage stability - CV ≤ 0.25% FS
  • - storage humidity - ≤ 80%
  • - Dimensions (DXSXW) - 24 x 11 x 16 cm
  • - weight - 2 kg
  • - Dimensions of shipment (DXSXW) - 33.5 x 16 x 23.5 cm
  • - shipping weight - 2.6 kg

Included:
  • - Laboratory power supply
  • - User manual
: 1018061
Out of Stock

Specific References

EAN13
4062859035677

16 other products in the same category:

   

Viewed products