Service Laboratory Power Supply 0-60 V 0-20 A DC 1200 W

Service Laboratory Power Supply 0-60 V 0-20 A DC 1200 W

1018674
Out of Stock
€252.64
Tax included
Quantity

Out-of-Stock
  Secure payment

By credit card and paypal

  Easy going back

Buy safely

  Fast delivery

With online tracking

Manufacturer's code: 10021283
Laboratory power supply Stamos Soldering It will work for powering external devices with a fixed current. It has been designed for professional use in the industrial sector, laboratories, telecommunications, in workshops and research institutes. Linear technologist provides Low residual axle and a small noise level. Big LED display It allows you to easily read the set values of the output, current and power voltage. Four memory locations They allow you to easily recall the often repeated values. The device is supported using knobs and buttons. The voltage is adjustable from 0 to 60 V DC from 0 to 20 a. The values can be controlled on large LED display, Adjusting them with ease to your needs. The power supply also has locking panel lock Preventing a random change of set parameters. If the power supply acts as a fixed voltage source (CV), the device automatically switches to a permanent current mode (CA) as soon as the load limit is reached. This prevents damage to the connected devices. The power supply has been equipped with overvoltage protection (OVP), Overcurrent protection (OCP), overload protection (OPP), Current reduction and special overheating protection (OTP). The fan ensures proper cooling. Non-slip rubber legs provide secure device setting, and protect the surface against scratches.
Product features: 
  • - adjustment in the range 0-60 V and 0-20 A,
  • - 4-digit LED display,
  • - 4 memory locations and interface with Modbus protocol to connect to a computer,
  • - built-in protection against overheating, overcurrent, overvoltage, excessive load,
  • - Intelligent temperature control and automatic change from permanent permanent voltage.

Technical parameters:
  • - catalog number - 10021283
  • - article - New
  • - Model - SEC-ĺş-104
  • - current stability - CC ≤ 0.25% FS
  • - connector [mm] - 4
  • - Cooling - Fan
  • - Current regulation range [A] - 0-20
  • - Display accuracy - Voltage: 10 MV intensity: 10 mA
  • - Color - Gray
  • - Current current - 0-20
  • - DC voltage adjustment range [V] - 0-60
  • - fuse [A] - 10
  • - Insulation resistance [MΩ] - ≤ 100
  • - voltage stabilization coefficient - CV: ≤ 0.5% CC: ≤ 0.5%
  • - Current stabilization coefficient - CV: ≤ 0.5% FS CC: ≤ 0.5% FS
  • - Working humidity [%] - ≤ 80
  • - starting current [A] - 20
  • - Security - OVP, OCP, OTP, OPP
  • - Power cord [m] - 1,5
  • - Output voltage [V] - 60
  • - resolution - 4-digit LED display / 10 MV / 10 mA
  • - Display - Led
  • - Relative permissible humidity of escaplet and storage [%] - ≤ 80
  • - Accuracy of parameter settings (25DEG C ± 5DEG C) - ± 1% FS ± 1
  • - Tension [V] - 230
  • - power [W] - 1200
  • - power [W] - 1,200
  • - Response time to the increase / voltage / current decrease (at 10% load) [ms] - 400
  • - Rated entrance current [A] - 6,8
  • - Rainting - ≤ 1%
  • - voltage range [V] - 0-60
  • - storage temperature [deg C] - -20 - +85
  • - voltage stability - CV ≤ 0.5% FS
  • - storage humidity - ≤ 80%
  • - Dimensions (DXSXW) - 23 x 32 x 16 cm
  • - weight - 5 kg

Included:
  • - Laboratory power supply
  • - User manual
: 1018674
Out of Stock

Specific References

EAN13
4062859035684

16 other products in the same category:

   

Viewed products