Manufacturer's code:
10021428Universal aluminum welder On the variable current (AC) or permanent current (DC) with a welding thickness of 0.5-5 mm will allow the weld aluminum, steel, stainless steel or copper. Selecting all welding parameters and welding current up to 200 a very easy on a transparent control panel.
On the LCD display with pre-installed English, German, French and Swedish languages you can check all values. In this way, precise welding results can be achieved. A modern IGBT inverter allows you to quickly switch between TIG DC, TIG AC and MMA welding methods.
Thanks to the current up to 200 and you can easily weld most of the metals regardless of the conditions. The pulsation function will allow you to get optimal welding results. Adjusting the frequency of pulses up to 200 Hz will enable the arc stabilizing even in difficult conditions. The welder has numerous parameters of the pulsation function, such as the initial, basic or final current. They are optimally used to the workpiece using the control panel.
The ergonomic shape of the welding holder will allow you to work in different positions, both vertically, level and on the head. The aluminum welder makes it possible to obtain high-quality welds with a smaller number of sparks or spatter. A modern IGBT inverter allows you to easily change all parameters. Regardless of whether it is switching from AC to DC or a 2- or 4-tact operation. MMA method will allow you to welding outside, even with strong wind.
With a constant current, a very good welding results of various metals, such as steel, iron, cast iron, nickel or copper can be achieved. The best results will achieve thanks to the Hot Start and Arc Force functions. The Hot Start function provides a short-term inculcement of the welding current after starting the welding process, so you can work reliably and clean from the first moment. The ARC Force function regulates the bow to adjust it to the welded material and the desired weld density. Use the attached electrode holder for electrodes with a diameter of 1.6-4 mm.
Product features: - - a digital control panel with a large LCD display and pre-installed English, German, French and Swedish languages, providing precise welding results,
- - ideal for steel, stainless steel, copper, as well as for aluminum thanks to TIG AC and pulsation function,
- - IGBT inverter with 2T / 4T function and high frequency ignition,
- - stable bow and optimal welding parameters thanks to the pulsation function,
- - MMA welding using Hot Start and Arc Force.
Technical parameters: - - catalog number - 10021428
- - article - New
- - Model - Entrix 200D
- - ignition TIG - Hf
- - Tension [V] - 220
- - IP protection degree - Ip21s
- - entrance power [kVA] - 6,06
- - Power factor - 0,73
- - MMA welding current [A] - 30-200
- - impulse current [A] - 10-200
- - Gas outflow time [s] - 1-10
- - Maximum entrance current [A] - 9,6
- - compliance with the standard - En60974-1
- - Maximum entrance current [A] - TIG: 28 MMA: 43.6
- - AC current balance [%] - 10-90%
- - Rated entrance current [A] - TIG: 17.7 MMA: 27.6
- - pulse frequency (AC) [Hz] - 0,5-200
- - pulse frequency (DC) [Hz] - 0,5-200
- - AC output current frequencies [Hz] - 0,5-200
- - 2/4 tact - So
- - Arc-Force - So
- - Hot Start - So
- - Cycle of work [%] - 80
- - TIG cable - 4 m
- - MMA cable - 3 m
- - Current drop time (down slope) - 25 s
- - grounding wire - 3 m
- - Dimensions (DXSXW) - 46 x 21.5 x 37.5 cm
- - weight - 19.46 kg
- - Dimensions of shipment (DXSXW) - 58 x 50 x 33 cm
- - shipping weight - 21.3 kg
Included: - - Aluminum welder
- - TIG WP26 welding holder with a wiring package (4 m)
- - Earthing clamp with a cable (3 m)
- - electrode handle with cable (3 m)
