MIG / MAG WELDER MMA FLUX IGBT TIG LIFTARC 250 A

Manufacturer's code: 10021501
MIG / MAG WATTER MAGITEX 250 brand Stamos Uses the latest technology IGBT inverter And offers the highest level of versatility and quality. Smooth welding current regulation up to 250 a Provides optimal welds with many different tasks. Welding wire, you can choose between the lithium wire to which the shield gas or the core wire is needed without additional gas. Migomat is completed with the MMA welding option, which allows you to easily use it outside in windy conditions. It is also possible to work with the method Tig Liffarc. All operating values are always visible on a transparent control panel. It is equally easy to choose a welding method between MIG / MAG, with self-welfare wire (Flux), TIG Liffarc and MMA, as well as switching between modes 2T and 4T. With full power, the MIG welder reaches 250 A and 60% Work cycle. It also has an integrated storage box on the reel with wire. Depending on the type and diameter of the welding wire, the corresponding mode is selected on the control panel or the SYNC mode switched on to make the parameters automatically selected. Mig welding uses neutral gases to copper, magnesium and other non-ferrous metals and their alloys. In turn, the MAG method needs active gas to optimally combine constructional steel, steel and most of their alloys. For welding without shielding gas, use a core wire and select Flux mode. The TIG method in this model uses the Missing of Liffarc to activate the arc. In the case of spot welding, select the Spot function on the display. Using the panel, it is easy to determine the current to 200 A. MMA welding mode is mainly used for iron or copper welding, as well as alloys such as cast iron or steel. Because no gas need for the electrode welding the electrode, the device can also be used in demanding conditions such as wind. The ARC Force function provides optimal results thanks to stable arc.
Product features:

• - MIG / MAG welder offers 250 A for MIG and Flux welding, 200 a for TIG Liftboard and 180 A for MMA,
• - the IGBT inverter in the fount and reliably processes all values, enables quick switching between modes and affects the compact size of the machine,
• - all settings are determined intuitively on a readable panel with a large display,
• - the type of gas (CO2 or Mixed), type and diameter of the welding wire (0.6 - 1 mm) and the point welding function for TIG Liffarc, is selected on the control panel.
• - Aluminum welder offers 2T mode for short welding works and 4T to longer tasks,
• - Welding in MMA mode, ARC Force is used to obtain high-quality welds.

Technical parameters:

• - catalog number - 10021501
• - article - New
• - Model - Magitex 250
• - Material - Carbon steel
• - Color - Black
• - Tension [V] - 230
• - IP protection degree - Ip21s
• - efficiency [%] - 80
• - entrance power [kVA] - 6,2
• - MMA welding current [A] - 20-180
• - TIG welding current [A] - 10-200
• - Insulation class - Hours
• - maximum welding current [A] - MIG: 250
• - Minimal welding current [A] - MIG: 30
• - 2/4 tact - So
• - Lift Tig - So
• - Arc-Force - So
• - MMA function - So
• - Cycle of work [%] - 60
• - MIG / MAG cable - 2 m
• - Dimensions (DXSXW) - 45 x 16 x 22 cm
• - weight - 6.4 kg
• - Dimensions of shipment (DXSXW) - 53 x 33 x 39 cm
• - shipping weight - 13.9 kg

Included:

• - MIG / MAG WATTER
• - MIG / MAG burner with a hose set (2 m)
• - electrode holder with a cable (1.8 m)
• - Earthing clamp with a cable (1.2 m)
• - power cord (2 m)