Home page

MMA IGBT inverter welder with HOT Start Arc Force 220 A functions

€113.93
Tax included
Payment
discover visa googlewallet paypal mastercard americanexpress
  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

Manufacturer's code: 10021385
Brand Stamos Germany This handy device for welding the electrode wraped with wires with a length of 8 m. Welding current is selected in the range 20-220 A Use the knob. To obtain a 100% operating cycle, adjust the welding current below 110 A. Readable LED display Allows you to check the set values. Long, 8 m wires Welding and grounding ensure maximum freedom of movement. To quickly perform a clean and strong weld with a reduced splash, use acid or alkaline electrodes with a diameter of 1.6-5.0 mm. The device is intended for welds with a thickness of up to 20 mm. Open circuit voltage 61 V and function Hot start They allow you to easily make a bow and achieve optimal welding results. Arc Force function Allows you to adjust the arc to the welded material to get a weld with the desired density. Technology IGBT It is characterized by increased efficiency. The equipment reliably compensates for the fluctuations in network voltage by +/- 10%. Because the MMA welding is not required, a shielding gas, can be effectively welded even in unfavorable conditions. MMA welder combines materials such as: steel, iron, cast iron, nickel or copper. Fan Cooling the device protecting them from overheating. The housing and front plastic cover are resistant to shocks and vibrations. Isolation, anti-static and low-coastal design ensure safe operation for many years.
Product features:
  • - Compact design and a strong IGBT inverter,
  • - Freedom of movement thanks to wire with MMA welding and earthing handle with a length of 8 m,
  • - welding current from 20 to 220 A and 100% work cycle at 110 A,
  • - Clean welding effects thanks to hot start, Arc Force and stable arch,
  • - Infinuous control and LED display.

Technical parameters:
  • - Model - SEC-mma230z
  • - catalog number - 10021385
  • - article - New
  • - Tension [V] - 230
  • - Cooling housing - Fan
  • - Cycle of work [%] - 25
  • - MMA cable [m] - 8
  • - Power cord [m] - 2,3
  • - Nominal input power [kVA] - 10,8
  • - mass cable [m] - 8
  • - Power factor - 0,73
  • - Maximum entry power [kVA] - 10,8
  • - Insulation class - F
  • - Maximum entrance current [A] - 46,3
  • - weldable thickness [mm] - 20
  • - Max. Welding current [A] - 220
  • - Min. Welding current [A] - 20
  • - IP protection degree - Ip21s
  • - Rated entrance current [A] - 23,2
  • - tension of idling [V] - 61
  • - Welding current in a 60% work cycle [A] - 141
  • - Welding current in the 100% work cycle [A] - 110
  • - Dimensions (DXSXW) [cm] - 38 x 15.5 x 32
  • - weight [kg] - 5,9
  • - Dimensions of shipment (DXSXW) [cm] - 46.5 x 30 x 36
  • - shipping weight [kg] - 10,6

Included:
  • - welder
  • - Welding holder with a wire (8 m)
  • - Earthing clamp with a wire (8 m)
  • - User manual
1015706
130 Items

Data sheet

Kod producenta
1015706
Comments (0)
No customer reviews for the moment.