DRITNER Diamond hole for concrete 2860 rpm. 1800 W

DRITNER Diamond hole for concrete 2860 rpm. 1800 W

MSW
1019656
Hurry! only 10 items left in stock.
€325.54
Tax included
Quantity

Buy it now and receive it on 11/3/25 with FedEx Express

  Secure payment

By credit card and paypal

  Easy going back

Buy safely

  Fast delivery

With online tracking

Manufacturer's code: 10062188
Mark's concrete drilling machine MSW It will facilitate drilling holes in hard materials, such as concrete, wall or asphalt. When drilling on a tripod (set), you can do holes with a diameter to 150 mm. Device 1800 W and maximum speed 2860 rpm It will enable manual drilling of holes to the diameter 90 mm. The best effects will get used using two power levels, as well as to use drills with the largest diameter at the lowest speed. Tripod for a drilling machine (It does not enter the scope of delivery) will allow you to increase the precision, but also use drills to 150 mm. The connector is integrated directly with the device. This drill consumption reduces, limits machine maintenance and provides longer life. Diamond core drill bit with different diameters are attached to the device using the handle. Diamond drill can be drilled in concrete reinforced, cement, wall, asphalt and natural stone. Length power cord 3.5 m Provides maximum freedom of movement. The built-in Differential Current Current Device switch allows you to always use the device safely. In the event of a short circuit, the operation is immediate.
Product features:
  • - an efficient, powerful 1800 engine in coal brushes,
  • - for core drills to Ø90 mm, with a tripod to Ø150 mm,
  • - accelerates up to 100 - 720/100 - 2860 rpm depending on the run,
  • - for dry and wet drilling,
  • - Safety with a Differential Cable (PRCD - Portable Residual Current Device).

Technical parameters:
  • - catalog number - 10062188
  • - article - New
  • - Model - MSW-Ddm-o1800p
  • - Material - Aluminum, Plastic, Copper, Iron
  • - length of the cooling hose [m] - 3,5
  • - Diameter of the lace drill fastening [''] - 1 1/4 - 7 UNC and G1 / 2
  • - current [A] - 10
  • - drilling lace dry and wet method - So
  • - Case included - So
  • - Drilling diameter 1/2/3 [mm] - 20-50 / 50-90
  • - Drilling diameter with a 1/2/3 race tripod [mm] - 80 / - / 150
  • - Maximum drilling diameter [mm] - 90/150
  • - Power cord [m] - 3,5
  • - PrcD protection module on the cable - So
  • - Tension [V] - 230
  • - power [W] - 1800
  • - rotational speed [obr./min] - 100 - 720/100 - 2860
  • - water hose diameter [mm] - 10
  • - water connector diameter ['] - 0.4
  • - acoustic power level [dB] - 100
  • - acoustic pressure level [dB] - 89
  • - Dimensions (DXSXW) - 56 x 30 x 30 cm
  • - weight - 11.2 kg
  • - Dimensions of shipment (DXSXW) - 17 x 50 x 43 cm
  • - shipping weight - 12 kg

Included:
  • - Concrete drilling machine
MSW
: 1019656
: 10 Items
Hurry! only 10 items left in stock.

Specific References

EAN13
4062859160348

16 other products in the same category:

   

Viewed products