15kw frequency converter 20km 380V 50-60Hz

Manufacturer's code: 10061535
Brand converter MSW for 15kw / 20hp With three-phase voltage support is a precision, easy-to-use and versatile device. This high-performance vector inverter of general low-speed destination and high torque. Devices should be used inside the rooms and protect against direct sunlight, dust, corrosive and flammable gases, oil mist, pairs, water, salt, etc. Three-phase converter 380 V It has a speed sensor vector control, vector controlling without sensor and v / F control. It also supports V / F separation control. Easy setting control allows the display Led. The equipment is equipped with a brake. Power engine 15 kw It has a number of collateral, including overheating, an optional multi-functional card and analog input A L 3. The engine temperature sensor input is acceptable. The supporting frequency can be adjusted automatically according to the load characteristics. The inverter has a linear or linear acceleration and a curve and four types of acceleration and release time (0.0-6500.0 SEC). Allows you to achieve the speed of work up to 16 segments thanks to the built-in controller PLC or control terminal. Automatic voltage adjustment makes when the mains voltage changes, the output voltage can still be kept constant (32 a). Automatic current and voltage restriction During operation, it prevents switching off due to overcurrent or overvoltage. Automatic torque limitation avoids overcurrent shutdown. The torque control can take place in a closed loop vector mode.
Product features:

• - engine engine 15 kW / 20 HP with 380V three-phase support,
• - Precise vector control (with and without sensor) and V / F control for the optimal torque curve,
• - the LED display ensures a convenient setting of parameters and their control,
• - various interfaces and extensive configuration parameters for a wide range of applications,
• - Safe through protection against overheating, overvoltage, voltage, overcurrent, overload and short circuits (motor-protected motor).

Technical parameters:

• - catalog number - 10061535
• - article - New
• - Model - MSW-Fi-15000
• - acceleration and release curve - Exemption and releasing linear or according to curve S, four types of acceleration and release time 0.0 ~ 6500.0 s Range of acceleration and releasing time 0.0 ~ 6500.0 S
• - Accuracy of digital regulation [Hz] - 0.01
• - Current value [%] - 0.0-100
• - braking time - Braking time: 0 ~ 36 S
• - carrier frequency - 0.5 ~ 16 kHz
• - Control mode - Vector Control in Open Loop (SVC) V / F, Vector Control in Closed Loop (FVC), Control V / F
• - ambient temperature [deg C] - 10-40
• - DC braking frequency - From 0.00 Hz to approx. Max. Frequency
• - Key lock - So
• - IP protection degree - 20
• - current on the entrance [A] - 35
• - frequency [Hz] - 50-60
• - Working humidity [%] - Less than 90%
• - current on the exit [A] - 32
• - overload protection - So
• - Engine - 15 kW / 20 HP
• - engine protection against overheating - Optional multi-purpose card, analogue A L 3, acceptable engine temperature sensor input
• - short circuit protection - So
• - Protection against exceeding the maximum current - So
• - Protection against overheating - So
• - Possibility of overloading - Machine type G: 150% of the 60S rated current, 180% of the 3S rated current, type P: 120% of the rated current 60s, 150% rated current 3S
• - Display - Led
• - Maximum frequency - Vector Control: 0 ~ 300 Hz, Control V / F: 0 ~ 3200 Hz V / F
• - point frequency range [Hz] - 0.00-50.00
• - Tension [V] - 380
• - point time acceleration and release [s] - 0.0-6500.0
• - power [W] - 7500
• - power [W] - 7,500
• - Protection against too high voltage - So
• - PLC driver for working with multiple speeds - It reaches the speed of operation up to 16 segments thanks to the built-in PLC controller or control terminal
• - simulation adjustment - Maximum frequency x 0.025%
• - precision of torque control - + 0.5% (FVC)
• - storage temperature [deg C] - 20-60
• - Raising torque - Automatic torque lifting, manual lifting of torque 0.1-30%
• - Speed range - 1: 100 (SVC), 1: 1000 (FVC)
• - Separation V / F - Full separation, Separation
• - V / F crook - Three Roads V / F: Multi-point type, Linear type, Infinite curve V / F power
• - Time Control Function [min] - 0.0-6500.0
• - starting moment - Machine G: 0.5 Hz / 150% (SVC), 0 Hz / 180%, Machine P (FVC): 0.5 Hz / 100%
• - accuracy of constant speed - + 0.5% (SVC), ± 0.02% (FVC)
• - rotational protection - So
• - Dimensions (DXSXW) - 32 x 21 x 19 cm
• - weight - 6 kg
• - Dimensions of shipment (DXSXW) - 41 x 29 x 29 cm
• - shipping weight - 7 kg

Included:

• - Frequency converter
• - No plug in the set